[time-nuts] WTB WECO Adapter

W4wj at aol.com W4wj at aol.com
Fri Jul 11 01:00:26 EDT 2014


TNX AGN Chuck!!
 
 
73
Don
W4WJ
 
 
 
In a message dated 7/10/2014 6:15:44 P.M. Central Daylight Time,  
cfharris at erols.com writes:

Err,  that is TEI-14949 AD1W

The "4" got eaten somehow.

-Chuck  Harris

W4wj at aol.com wrote:
> TNX for that information  Chuck!!
>
> 73
> Don
>  W4WJ
>
>
>
> In a message dated 7/10/2014 5:29:28 P.M.  Central Daylight Time,
> cfharris at erols.com writes:
>
>  Be  warned, that Trompeter makes at least two varieties.
> The one  you want has  the thicker center pin that extends
> to within 1/8  inch of the end of the  shield.  The incorrect
> connector has  a thinner center pin that only  extends to
> about 1/4 inch of the  end of the shield.
>
> The family  number of both the right  and the wrong connector
> is the same:  TEI-14949
>
>  The part that specifies the pin is AD1 for the wrong  connector,
>  and AD1W for the right connector...
>
> So the full part   number of the connector you desire is:
>
> TEI-1949  AD1W
>
> These are  Western Electric (eg. telco) connectors,  not the
> more common video patch  panel  connectors.
>
> -Chuck  Harris
_______________________________________________
time-nuts mailing  list -- time-nuts at febo.com
To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.




More information about the time-nuts mailing list