[time-nuts] TU60-D120-041 power up
Michael Jensen
mriisj at danamps.dk
Mon Jun 23 18:06:33 UTC 2014
Jerry it transmit navmann binary protecol and the 1 Sec puls come on almost
after power on but it produce this pulse both with or without sattlites
received, I can mail you a small program which program it to transmit NMEA
format, it does not keep this infor when powered off.
Michael, OZ2ELA
-----Oprindelig meddelelse-----
Fra: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] På vegne
af Jerry
Sendt: 23. juni 2014 05:53
Til: time-nuts at febo.com
Emne: [time-nuts] TU60-D120-041 power up
I bought a receiver labelled as Conexant Jupiter-T TU60-D120-041. I
constructed an RS-232 serial interface, a 1 Pulse per Second LED and a
10 kHz test point. After a few minutes the 1 pulse per second LED syncs up
with the audible ticks on WWV so it seems that the receiver is receiving the
satellites in some fashion.
I would like to monitor the satellite and receiver status using WinLabMon or
something like it. At power up I see a single 14 msec burst of data coming
out of the receiver serial port but I have no idea what that data says.
Is that the default power up state, just a single burst of data?
What should I be doing to get meaningful data out of the receiver into the
computer?
Thank you, Jerry
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list