[time-nuts] HP 58503A acurate UTC time
Tom Van Baak
tvb at LeapSecond.com
Tue Mar 11 19:11:32 UTC 2014
> a.. So how do I set it to read real time ?
Try :DIAG:GPS:UTC 1
> b.. And is there a way of dimming or tuning off the display ?
No software command, but you try adding a resistor or switch to the VFD power.
> c.. Finally, how do I stop it doing a survey every time ?
Try :GPS:POS: ...
/tvb
----- Original Message -----
From: "Timestep" <Information at time-step.com>
To: <time-nuts at febo.com>
Sent: Tuesday, March 11, 2014 11:33 AM
Subject: [time-nuts] HP 58503A acurate UTC time
> From: Dave Cawley
> Timestep Dartmouth
> Tel: +44 (0) 1803 833366
> Fax: +44 (0) 1803 839498
>
> HP 58503A accurate UTC time
>
> I have the version with the display panel and also the SatStat50 software all working fine.
>
> The time on both the display and PC appears to be 16 seconds fast. I queried the leap second and it says correctly 16 seconds.
>
> The display reads : GPS hh:mm:ss
>
> a.. So how do I set it to read real time ?
> b.. And is there a way of dimming or tuning off the display ?
> c.. Finally, how do I stop it doing a survey every time ?
> I know this must be obvious, but right now to me it isn't !
> Thanks
>
> Dave
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list