[time-nuts] Power Supply for AD9852 / AD9854

[d0ct0r]

Hello,

By design, DDS "stones" like AD9852 from Analog Devices, required 
separated power lines for AVDD, DVDD and VCC.
What will is simple solution for that ?  I am planing to use following 
approach: +5V from linear PS, then three LC filters, then three 3.3V 
voltage regulators (Ex.: MC33269T) connected to each filter. Is it good 
enough ?


May be its better solution for this ? Or may be that could be simplified 
to join AVDD and VCC (AVDD will be connected to VCC via 100 Ohm). Thanks 
in advance !

-- 
WBW,

V.P.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pf.png
Type: image/png
Size: 12327 bytes
Desc: not available
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20140315/0edf09ee/attachment.png>