[time-nuts] Beaglebone NTP server

[Bob Camp]

Hi

With a GPIO pulse width should not be an issue. With RS-232 you might have needed a pulse stretcher.

Bob

On Mar 26, 2014, at 7:18 PM, Brian Lloyd <brian at lloyd.com> wrote:

> On Wed, Mar 26, 2014 at 5:05 PM, Bob Camp <lists at rtty.us> wrote:
> 
>> Hi
>> 
>> The quick / dirty / easy way for any of the NTP stuff with a GPSDO is to
>> simply run the PPS in. PPS into serial is one way, pps into a GPIO is
>> another way.
>> 
> 
> Well, yeah. I figured that I would run the 1pps from my T-bolt to a GPIO
> line with appropriate clamping to 3.3V.
> 
> But if anyone has done this before and run into anything of note, that
> would be nice to know ahead of time.
> 
> -- 
> Brian Lloyd, WB6RQN/J79BPL
> 706 Flightline Drive
> Spring Branch, TX 78070
> brian at lloyd.com
> +1.916.877.5067
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.