[time-nuts] STEL 1173 datasheet

paul swed paulswedb at gmail.com
Wed May 7 13:40:41 EDT 2014


Wow at $155 or $125 + $65 for a stel replacement chip.
Like the concept they have of allowing you to rewire the pins and frankly
it would appear the $125 is a cleaner fit if it can be offset in the CS ref.
But hey its not my project so will watch from the side lines.
Paul
WB8TSL





On Wed, May 7, 2014 at 1:06 PM, Robert LaJeunesse <rlajeunesse at sbcglobal.net
> wrote:

> The PLCC "plug" portion for an adapter can be had from at least one
> manufacturer for $36 US:
>
> http://www.ironwoodelectronics.com/catalog/Content/Drawings/PL-PLCC044-S-01FDwg.pdf
>
>
> Bob LaJeunesse
>
>
>
> >________________________________
> > From: Jason Rabel <jason at extremeoverclocking.com>
> >To: time-nuts at febo.com
> >Sent: Wednesday, May 7, 2014 12:52 PM
> >Subject: Re: [time-nuts] STEL 1173 datasheet
> >
> >
> >...
> >
> >You can probably find the PLCC pin part and a DIP socket on like Mouser,
> Digikey, or Allied... Then just spend a little time
> >soldering wires to make an adapter... Or even order/make a custom
> prototype board from those sites that will do one-off's?
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



More information about the time-nuts mailing list