[time-nuts] BeagleBone Black NTP server
docdailey at gmail.com
Fri May 9 22:59:22 EDT 2014
I have the adafruit and a ublox-6T each mated to raspberry pi's. With NTP they are essentially indistinguishable. I have something other than NTP in mind for the 6Tpi.
Sent from my iPad
> On May 9, 2014, at 9:32 PM, Brian Lloyd <brian at lloyd.com> wrote:
> On Fri, May 9, 2014 at 8:49 PM, Chris Albertson
> <albertson.chris at gmail.com>wrote:
>>> On Fri, May 9, 2014 at 1:55 PM, Brian Lloyd <brian at lloyd.com> wrote:
>>> Has anyone here made NTP run on BBB? My plan is to run NTP disciplined by
>>> my Trimble Thunderbolt on BBB.
>> NTP is likely already installed on the BBB. It ships with the BBB.
> That may be the case for the Angstrom distro but it is not the case for the
> Debian distro, which seems to be the future direction of BBB.
>> configuration is needed to enable the service. Do this first and verify
>> you can run using Internet pool servers. Then after this is running you
>> physically connect your GPS then add lines in NTP's config file telling NTP
>> you have added another ref. clock.
> This link:
> Seems to have the bulk of the requisite information including building a
> GPS cape using the Adafruit GPS module. See:
> This isn't a timing receiver but would probably be adequate for NTP. But
> since I already have a T-bolt I figured I would use that as my timing
> Brian Lloyd, WB6RQN/J79BPL
> 706 Flightline Drive
> Spring Branch, TX 78070
> brian at lloyd.com
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts