[time-nuts] Lucent KS-24361, HP/Symmetricom Z3809A, Z3810A, Z3811A, Z3812A GPSDO system

[Anthony Roby]

For those who missed it, Arthur's post is at https://www.febo.com/pipermail/time-nuts/2010-June/047825.html and the photo is at http://i906.photobucket.com/albums/ac262/rjb1998/RFTG-uREF1photo1_zps87c505ca.jpg

Anthony




-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Arthur Dent
Sent: Friday, October 31, 2014 9:20 PM
To: time-nuts at febo.com
Subject: [time-nuts] Lucent KS-24361, HP/Symmetricom Z3809A, Z3810A, Z3811A, Z3812A GPSDO system

Bob Stewart bob at evoria.net
 ?? ? I have both of my units sitting on the bench. I found that I needed to connect them together to get the REF1 unit to come out of standby ? . ??

Bob Camp kb8tq at n1k.org
 ??I suspect that somebody will have to figure out what the 15 pin connector / jumper is doing. On previous RFTG units there was a way to re-wire the crossover interface to fake out the slave detect process. That would let you run a single GPS equipped box and have it behave correctly. Without the fake wires trick none of them played nice without the slave being present ? . ??
++++++++++++++++++++++++++++++++++++++
Reposting what I had posted over a week ago, in case you missed it ? .

Arthur Dent golgarfrincham at gmail.com Wed Oct 22 13:59:48 EDT 2014  ?? ? Way back on Fri Jun 11 16:48:43 UTC 2010 I posted about using one of these units I had modified but at the time there wasn't a single person who was interested. I have been using the RFTG-u REF1 since then and it is a nice unit. The modifications I added (including a power supply -see photo) allows the lights to cycle through their normal sequence on warm-up and the second unit isn't needed at all ? . ??

-Arthur
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.