[time-nuts] Lucent KS-24361, HP/Symmetricom Z3809A, Z3810A, Z3811A, Z3812...
GandalfG8 at aol.com
GandalfG8 at aol.com
Sun Nov 2 22:48:26 UTC 2014
Thanks Gotz
2 and 3 grounded works fine for me too, although I still have one unit that
insists on flashing the ON light rather than bringing it on solid. In all
other respects both units seem to match. Two more should be arriving
sometime in the next couple of weeks so will see how they match up.
Just for reference, pin 13 is also a ground connection so if just pushing
wires into the connector it might be convenient to use both grounds.
Regards
Nigel
GM8PZR
In a message dated 02/11/2014 17:58:12 GMT Standard Time, goetz at g-romahn.de
writes:
Am 02.11.2014 15:08, :
> Ooh err, whoops, and oh dear !!
>
> Arthur, I've only just had a chance to look at your latest photos, and
> unless I've really got my wires crossed, if you'll pardon the
expression:-),
> your links on J5 are not shown on pins 2, 10, 12, and 15, but on pins
4, 6,
> 11, and 13.
>
> As far as I'm aware the numbering from the front of that connector as
shown
> starts in the top right hand corner and every row is numbered right to
> left.
> That's certainly how mine are numbered anyway, and I wired them
> accordingly, and it worked, so where the heck does that leave us now?:-)
>
--------------------------
thanks Nigel for detecting this glitch. I removed all jumpers now and
tested some reasonable new/old combinations resulting in very simple
scheme:
it seems to be sufficient to connect pin2 and pin3 to pin8 (ground).
Numbering as provided by Nigel and markings on my 15 pin-plug.
Götz
More information about the Time-nuts_lists.febo.com
mailing list