[time-nuts] Lucent KS-24361 GPSDO arrived today several questions
Bob Camp
kb8tq at n1k.org
Sat Nov 8 01:10:36 UTC 2014
HI
Just in case, here’s the codes I used via the terminal to play with the boxes:
:SYST:STAT system status
:PTIM:EMAN elevation mask
:DIAG:ROSC:EFC efc percentage
:PTIM:GPS:POS:HOLD:LAST last survey
*IDN? unit identification string
All follow the normal SCPI format of putting either a ? or a number at the end depending if you want to see what’s there or change it. The only one I tried to change was the elevation mask. All of the ones above worked fine with a ? on the end of the string.
I did figure out my issue with the error code replies. Pure stupidity on my part. SCPI requires you to clear errors once they happen. I always forget to do that when I’m on a terminal connection.
Bob
> On Nov 7, 2014, at 6:30 PM, GandalfG8--- via time-nuts <time-nuts at febo.com> wrote:
>
> Can't argue with that, was just responding to some comments re SatStat:-),
> although I do find it quite handy sometimes as a quick confirmation all is
> ok.
>
> Regards
>
> Nigel
> GM8PZR
>
>
>
More information about the Time-nuts_lists.febo.com
mailing list