[time-nuts] Divide by five

Joseph Gray jgray at zianet.com
Sat Nov 8 03:37:59 UTC 2014


Looks like I can get the 74AC161 in DIP from Mouser. Thanks to everyone for
the suggestions. I still like DIP for prototyping on breadboards.

Joe Gray
W5JG


On Fri, Nov 7, 2014 at 4:45 PM, Alex Pummer <alex at pcscons.com> wrote:

>
>
> check if you could get a 74AC161, which could be connected  to divide by 5
> at 125 MHz see here http://ecee.colorado.edu/~mcleod/pdfs/IADE/references/
> 74AC161.pdf to be sure to work at 125MHz run with 5,5 to 6V...
>
> 73
> Alex
>
>
>
> On 11/7/2014 1:12 PM, Joseph Gray wrote:
>
>> I need to divide a 125 Mhz clock by five. I have looked on Mouser and
>> every
>> chip I find is either obsolete or in SMT. Can anyone recommend a chip that
>> is fast enough and comes in DIP?
>>
>> Joe Gray
>> W5JG
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/
>> mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>
>



More information about the Time-nuts_lists.febo.com mailing list