[time-nuts] KS-24361 15 pin interface quick solution

paul swed paulswedb at gmail.com
Mon Nov 10 01:33:09 UTC 2014


Turns out the Interface J5 perfectly accepts .1 inch spaced pins.
You may have these laying around. I simply snipped off 2 sets of 3 pins.
Placing them in  J5 1-3 and J5 6-8. The additional pins make it very stable.
Then solder ground from pin 8 to 3 and 470 ohm chip resistor from 3 to 2.
Thats it. Very stable with parts from the drawer.

Regards
Paul
WB8TSL



More information about the Time-nuts_lists.febo.com mailing list