[time-nuts] Lucent KS-24361 24V DC power requirements

[Anthony Roby]

I have been using a Universal 24V 5A DC Switching Power Supply from eBay.  I have not seen my units draw more than 2A each - steady state is about 1.1A.

Anthony

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of planophore at aei.ca
Sent: Friday, November 21, 2014 11:25 AM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] Lucent KS-24361 24V DC power requirements

Good day all,

I have been following the discussions as best as I could. I recell seeing the question asked or at least theorized as to what is the power requirements of these units - either individually or together.

I have reviewed all messages or at least all that I can find in these threads but I couldn't find a definitive answer unless of course the answer is in one of the responses hiding where I haven't looked.

I purchased a set of these modules and they are currently in transit but I don't have a 24V DC supply at the moment.

So, in order to try and get ahead before the arrival of these modules I would like to at least plan out if not get a suitable power supply ready. I don't want to over specify by too much and worse yet, under specify.

Has anyone actually made any power used measurements of these modules? 2A average, 4A peak? Somewhere inbetween or more?

cheers, Graham ve3gtc
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.