[time-nuts] Convert Stanford Research SR620 time-interval counter to SR625 ???

[Brooke Clarke]

Hi David:

If you look just to the right of the SR620 you will see a separate box that contains the PRS10.

The PRS10 can work as either a Rb GPSDO or as a time stamping device.  For the SR620 any GPSDO would make a good 
external reference.
http://www.prc68.com/I/LTE-LiteGPSDO.html#Related

Mail_Attachment --
Have Fun,

Brooke Clarke
http://www.PRC68.com
http://www.end2partygovernment.com/2012Issues.html
http://www.prc68.com/I/DietNutrition.html
Dr. David Kirkby (Kirkby Microwave Ltd) wrote:
> I finally paid for a used SR620
>
> http://www.thinksrs.com/products/SR620.htm
>
> today, after the seller has done quite a few tests on it, so hopefully
> I should have a good one.
>
> I note Stanford Research also do an SR625
>
> http://www.thinksrs.com/products/SR625.htm
>
> which seems to have two differences
>
> a) It uses a PRS10 timebase
> b) Has a 2 GHz pre-scaler.
>
> I wonder if anyone has tried fitting a PRS10 into an SR620 to make it
> close to an SR625? I'm not too fussed about having 2 GHz, as I just
> bought a nice condition HP 5342A microwave (18 GHz) counter. But I
> would be interested in fitting an Rb source in the SR620.
>
>
>
> Dr. David Kirkby Ph.D CEng MIET
> Kirkby Microwave Ltd
> Registered office: Stokes Hall Lodge, Burnham Rd, Althorne, Essex, CM3 6DT, UK.
> Registered in England and Wales, company number 08914892.
> http://www.kirkbymicrowave.co.uk/
> Tel: 07910 441670 / +44 7910 441670 (0900 to 2100 GMT only please)
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>