[time-nuts] Upgrade an HP 5342A microwave frequency counter to have an oven oscillator.
Bob Camp
kb8tq at n1k.org
Fri Nov 28 00:01:02 UTC 2014
Hi
In this case I suspect he’s referring to the version with the edge connector on it. That’s the one most instruments use rather than the connector only version or the “double oven” version. I believe that makes it a 10811A rather than a 10811B.
There are a multitude of details here:
https://www.febo.com/pages/hp10811/HP10811AB-Manual.pdf
There are indeed other versions that came out after the manual.
Bob
> On Nov 27, 2014, at 5:48 PM, Didier Juges <shalimr9 at gmail.com> wrote:
>
> "Just remove the TCXO the 10811 just plugs in"
>
> Note that there are many different versions of the 10811. I am familiar
> with at least two incompatible mechanical configurations: one is
> connectorized and the other is not.
>
> Didier KO4BB
>
> On Thu, Nov 27, 2014 at 5:43 PM, Scott McGrath <scmcgrath at gmail.com> wrote:
>
>> Just remove the TCXO the 10811 just plugs in, you will need to add the
>> heater oven indicator wiring and LED indicator which is usually over the
>> power switch The power supply includes the oven supply already
>>
>> Content by Scott
>> Typos by Siri
>>
>>> On Nov 27, 2014, at 5:38 PM, "Dr. David Kirkby (Kirkby Microwave Ltd)" <
>> drkirkby at kirkbymicrowave.co.uk> wrote:
>>>
>>> The HP 5342A has an optional oven oscillator. I just bought one of
>>> those counters, but mine has a TCXO and is about 50 kHz off at 10 GHz.
>>> I'm sure I can trim it closer than that, but if possible I'd like to
>>> stick an oven oscillator in it. Does anyone know what is involved? I
>>> have at least one 10811A oscillator here that I could stick inside,
>>> but does it need any more, or just the oscillator?
>>>
>>> Someone said the oscillator should be an 10544-60011, but a 10811A is
>>> backwards compatible.
>>>
>>> Dave
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list