[time-nuts] LTE-Lite

Bob Camp kb8tq at n1k.org
Fri Nov 28 21:55:05 UTC 2014


Hi

The “new chip ID, new com port” thing is pretty typical for the FTDI drivers. If you plug the old LTE back in there’s a good chance it will come back up as COMM 5. Usually they are pretty good about only adding ports for devices they have not seen before.

Bob

> On Nov 28, 2014, at 3:23 PM, Jim Sanford <wb4gcs at wb4gcs.org> wrote:
> 
> All:
> 
> After running my 20 MHz LTE-Lite for a week or so, I shut it down and connected one of the 10 MHz units.
> 
> The LEDs appear to be responding (survey still in progress) as per the quick start guide.
> 
> Windows installed a new comm port and driver.  (COMM6, with FTDI driver)  The COMM5 port which was the 20 MHz unit is gone.
> 
> U-center has selected COMM6 and is autobaud at 38000, but is showing my nothing except blank screens and a red NO FIX.  Have I missed something?  Or will it not report anything until a lock is achieved??
> 
> Thanks,
> Jim
> wb4gcs at amsat.org
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the Time-nuts_lists.febo.com mailing list