[time-nuts] HP10811-60212-B Pinouts.

dan at irtelemetrics.com dan at irtelemetrics.com
Sat Oct 11 12:57:12 EDT 2014


Hi All,

Yeah, that's the oscillator. The cables match the connector labels on 
the board. Same blue coax cables. 

Anyway, as this unit is missing the external oven controller, Is anyone 
aware of an aftermarket controller or a good reference for the 
controller required? I'm sure one can always build a controller, but 
buying something ready to go would be a better option! 

Thanks!
Dan

> bob at evoria.net said:
> > I found a picture that looks  like your OCXO on Brooke Clarke's website. 
> > Maybe he has a schematic or pinouts for the oscillator. 
> > http://www.prc68.com/I/Images/Z3805A07b.jpg More info here:
>   http://www.prc68.com/I/Z3805A.html
>
> The Z3805A is very similar to the Z3801A
>
>
> Brooke:
>   typo in http://www.prc68.com/Alpha.shtml
> Down at the bottom, the link to the Z3805A page goes to
>   file:///C:/Webdocs_Hosted/I/Z3805A.html





More information about the time-nuts mailing list