[time-nuts] newcomer

steph.rey steph.rey at wanadoo.fr
Mon Sep 15 16:40:35 UTC 2014


 Hi,

 It sounds like all my messages need moderator approbation. Is it the 
 rule on the list or a technical problem at my side ?
 Cheers
 Stephane



 On Mon, 15 Sep 2014 09:17:01 -0700, Said Jackson via time-nuts 
 <time-nuts at febo.com> wrote:
> Hi Stephanie,
>
> Welcome to the list!
>
> We designed a 1GHz crystal LO for PLLs (the ULN-1G) using an off the
> shelf miniature 500MHz crystal oscillator which is run at 3 rd
> overtone internally then using a diode doubler and a steep bandpass
> filter using several Mini Circuits ceramic filters and a 20dBm amp.
>
> Works like a charm and has phase noise very close to theoretical..
>
> Bye,
> Said
>
> Sent From iPhone
>
>> On Sep 15, 2014, at 5:50, "steph.rey" <steph.rey at wanadoo.fr> wrote:
>>
>> Hi the list,
>>
>> Just wanted to introduce myself for my 1st message.
>> I'm Stephane, 40, living in France, at the moment working in RF & 
>> electronics for a particles accelerator lab. I'm hamradio as well, and 
>> I do enjoy especially weak and accurate signals.
>> I'm desiging various RF circuits. Current design is a universal PLL 
>> able to operate from 0.5 to 6 GHz depending on the VCO and supposed to 
>> be "low-jitter" (<1ps) regarding the application.
>> I'm also starting a new design of low noise PLL and there will be 
>> probably a lot of question arising... I'm starting with the 1 GHz LO 
>> made upon a 100 MHz VCXO + multipliers/filters/MMICs.
>> I want to focus deeper on low phase noise/jitter, synchronization 
>> and low-noise PLL techniques.
>> I believe this is a good place for most of these topics.
>>
>>
>> Cheers
>> Stephane
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to 
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the Time-nuts_lists.febo.com mailing list