[time-nuts] TimeLab with Wine: No RS232 interface available
Jim Lux
jimlux at earthlink.net
Thu Feb 5 05:18:57 UTC 2015
On 2/4/15 3:55 PM, Mark Sims wrote:
> I have seen several issues with Windows programs not releasing (or perhaps not being able to releaase) the serial ports after using them. Once one of these programs accesses the serial port, no other programs can use it until you re-boot. I'm fighting windoze Hypertrm right now over this issue trying to read from a freq counter for some ADEV measurements. Once HYPERTRM runs, no other program can access the serial port.
>
> Lady Heather seems to work fine with Wine, but I have not tried it after running HYPERTRM.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
One trick with Windows is to disable and then renable the serial port,
in particular, USB ports sometimes get stuck, and this fixes them.
There's also some power management things with USB connected ports that
can get things confused. (You don't want USB selective suspend enabled)
there's a command line tools that can do this, or you can use Device
Manager.
http://support.microsoft.com/kb/311272 describes devcon, which can do
all sorts of useful stuff.
More information about the Time-nuts_lists.febo.com
mailing list