[time-nuts] Arduino GPIB

[Jim Lux]

On 1/12/15 1:00 PM, Tom Van Baak wrote:
>> Yes, you can get an Arduino R3 on eBay for <$4 with shipping...
>>
>> The GPIB connector will cost you more!
>>
>> Didier KO4BB
>
> A sandwich of two PCB is about the same thickness as the center plug of a GPIB male connector. So layout 2x12 pads to match the pins and you have a one-piece Arduino and GPIB connector board.
>

With a bit of masking tape and baling wire to hold it in place, and 
you're set..