[time-nuts] Z3801A Oven Controller Schematic Needed

[Mike Cook]

There are some schematics on Didier’s site <http://www.ko4bb.com/manuals> . If they are not sufficient and none are forthcoming, I have one powered down which I could photo if you think that would help.

> Le 13 janv. 2015 à 18:21, Craig Anderson <w9cla at baldwin-telecom.net> a écrit :
> 
> I had a recent meltdown (flameout really) of a 10ufd 35 volt Tantalum on the
> bottom side of the main oven controller board near J-16,  the 9 pin
> connector coming from the power supply board. 
> 
> 
> 
> Does anyone have the section of the schematic that covers that area.  I did
> get the component values of the parts in the area that were destroyed but
> the foil is damaged and I need to see the interconnections in order to
> repair the board.
> 
> 
> 
> Thanks,
> 
> 
> 
> Craig W9CLA
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.