[time-nuts] SR620 setup with TimeLab
James Robbins
jsrobbins at earthlink.net
Tue Jan 20 22:18:45 UTC 2015
Does anyone have experience setting up a SR620 for use with TimeLab?
(I have used my 53132A in its' "Talk Only" mode quite successfully.)
I am using a Null Modem RS232 cable (I have also tried a straight through
one).
I am running a 10MHz oscillator into the first channel of the 620 against my
Fury as a TB and trying to produce an ADEV.
The TimeLab "Monitor" box shows the following text updated every second or
so: "STRT;*WAI;XAVG" I have chosen "Acquire" for the SR620 from the TL
software.
I have set up the SR620 with the following settings:
Configuration Menu: CTRL
1. RS232 19.2K
2. Echo OFF
3. Bits 8
4. PAR None
5. COM port correctly set in TL (using an Edgeport converter for
RS232 to USB)
Configuration Menu: OUT
1. Output is PRINTER
2. PmPort is PRINT
3. Graph is OFF
I have tried various other choices, but nothing seems to cause TL to read
anything but STRT;*WAI,XAVG.
I would be happy to exchange info off list. jsrobbins at earthlink.net.
Jim Robbins
N1JR
More information about the Time-nuts_lists.febo.com
mailing list