[time-nuts] 10MHz Square to Sine Wave Conversion

[Bob Camp]

Hi

Ok, so one more vote for a gate driving a T network.

Bob

> On Jul 17, 2015, at 2:21 PM, Alex Pummer <alex at pcscons.com> wrote:
> 
> 
> 
> Charles Wenzel has very simple but good working solution, here is :
> http://www.wenzel.com/documents/waveform.html
> 
> 
> On 7/17/2015 8:20 AM, Richard Solomon wrote:
>> I have a Mini-Circuits BLP-10.7 that I picked up at a Flea Market that does the job.
>> And no, I do not want to sell it !!
>> 
>> 73, Dick, W1KSZ
>> 
>> On 7/16/2015 10:47 PM, Jason Ball wrote:
>>> A would have thought a simple band pass filter would do the job by tuning
>>> out the harmonics.
>>> 
>>> On Fri, Jul 17, 2015 at 3:49 AM, skipp Isaham via time-nuts <
>>> time-nuts at febo.com> wrote:
>>> 
>>>> re: 10MHz Square to Sine Wave Conversion
>>>> 
>>>> The GPSDO I recently acquired outputs a 10 MHz square wave. I'd like
>>>> to convert it to a sine wave and I am looking for suggestions and info re
>>>> any reasonable pre-made circuits and/or boards. No sense reinventing the
>>>> wheel if I can avoid it.
>>>> 
>>>> Otherwise I will start from scratch and make a new wheel....
>>>> 
>>>> Thank you in advance for your replies.
>>>> 
>>>> Regards,
>>>> 
>>>> skipp
>>>> 
>>>> skipp025 at yahoo dot com
>>>> 
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to
>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>> and follow the instructions there.
>>>> 
>>> 
>>> 
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.