[time-nuts] Thunderbolt power connector crimper

[Mike Feher]

I forget the size of the pins on the Thunderbolt, but, I bought a crimper tool for Molex pins a while ago for a rather good price and really like it. This will crimp multiple gauge Molex pins and as I mentioned is very reasonably priced.. Shipping to Oz is another matter :).. 73 - Mike

http://www.powerwerx.com/search.asp?q=ct-oem 

Mike B. Feher, EOZ Inc.
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960 office
908-902-3831 cell

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Matt Robert
Sent: Monday, June 08, 2015 6:29 AM
To: time-nuts at febo.com
Subject: [time-nuts] Thunderbolt power connector crimper

Hi Guys,

I am currently in the process of completing my Thunderbolt project and I need to find a suitable crimper to attach wires to the pins that go inside the power connector.

The only reference I can find is on this page here (
http://www.prc68.com/I/ThunderBolt.shtml) that talks about the official Molex tool which is scarily expensive, and the page also mentioned a Radioshack tool that I can't find any further details on.

Can someone please point me in the right direction of a suitable crimper for the Molex 538-16-02-0103 pins.

Cheers,
Matt
VK2LK
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.