[time-nuts] z3801a - serial help and for sale

Mike Feher mfeher at eozinc.com
Thu Jun 11 20:21:09 EDT 2015


I modified one of my 3801s by placing a home brew linear power supply in it and a regular 3 connector AC plug in place of the 48 volt one. The power supply with the transformers was a tight fit, but I managed. It has been working fine for about 12 years. I also replaced the solid top cover with a fine mesh copper cover to get rid of the extra heat. Regards - Mike . 

Mike B. Feher, EOZ Inc.
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960 office
908-902-3831 cell


-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of David Andersen
Sent: Thursday, June 11, 2015 4:39 PM
To: time-nuts at febo.com
Subject: Re: [time-nuts] z3801a - serial help and for sale

Thanks for the suggestions!

It turns out the answer was.... my serial dongle was failing.

*head bonk*  I swapped it out for another FDTI-based dongle and suddenly there's a happy working z3801a.

Before I throw it on eBay, would anyone like a working (yay!) z3801a modified to take mains power?  I'll throw in a little puck antenna and a homebrewed rs232 db25-to-db9 cable.  Pictures as per my previous email about it.

(please CC: me on reply -- I'm stuck in digest subscription and having
issues.)  ((No 'issues' jokes, please. :))

I'll note there's a risk that putting the switcher in it causes added noise.  I haven't measured it precisely enough to tell.  I didn't need nanoseconds for what I was using it for, but I did want it to be pain-free to plug in and use.

 -Dave





More information about the time-nuts mailing list