[time-nuts] Lady Heather

[0521Bryan .]

Any chance your issue is related to trying to maximize the windows size
with Lady Heather. Perhaps try a  different start up screen resolution in
the Lady heather settings.

On Wed, Mar 11, 2015 at 5:04 PM, James Tucker <james.d.tucker at gmail.com>
wrote:

> Mark, and anyone else interested;
>
> I have an 'E' Thunderbolt, and use LH3.10 to monitor it contiguously, and
> with no issues not related to the device itself (iffy eeprom/flash, crystal
> jumps), but it even shows all 12 slots for available birds, so it works
> fine for me on W7Pro. No special command line options for serial port.
> EdgePort USB converter.
>
> JimT
>
> Sent from *my* galaxy (Nexus).
> On Mar 9, 2015 10:37 PM, "Mark Sims" <holrum at hotmail.com> wrote:
>
> > Lady Heather is set up to run the serial port at 9600,8,N,1   If it sees
> > data errors,  after around 20-35 seconds or so,  it toggles to 9600,8,O,1
> >  This feature was added to support the Trimble Resolution timing
> > receivers.   You can try the /rt command line option and see if that
> makes
> > any difference.  That will force the ODD  parity flag.  Or you might try
> > configuring the receiver for 9600,8,N,1 via the Trimble software. BTW,
> Lady
> > Heather has never been officially tested with the Thunderbolt-E ...
> nobody
> > seems to use/have them.
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>