[time-nuts] Obscure HP T/F instruments in ebay.fr

[Adrian Godwin]

The HP101A and 5275A arrived today. The 101A warmed up in about an hour and
the crystal temp settled. It's now reading 999998.50 against my 53131A
(med. stability option but uncalibrated).

I'm not sure what the spec is, or how long ago it was tuned - but even if
it was set recently, it's still survived a DHL truck from france with
little error.



On Sat, Mar 21, 2015 at 8:05 PM, Bill Byrom <time at radio.sent.com> wrote:

> Warning: Discussion of old pre-1980 technology follows ...
>
> The Computer History Museum in Mountain View, CA, is amazing. I wish I
> hadn't sold my original issue Commodore PET 2001, but you can find
> examples of this and a wide range of early computers from the
> 1940's/50's/60's/70's (such as SAGE and CDC6400/6600) at the museum:
> http://www.computerhistory.org/ They have an operational Babbage
> Difference Engine No. 2: http://www.computerhistory.org/babbage/
>
> I have worked for Tektronix for 28 years. Many of you may be interested
> in the vintageTEK website: http://www.vintagetek.org/ For those of you
> who have read old Tektronix service manuals with schematics:
> http://www.reprise.com/host/tektronix/humor/
>
> Only a few of us existing Tektronix employees have been with the company
> long enough to have been involved in selling and supporting analog CRT
> oscilloscopes, TM500/TM5000 modular equipment, and the Tek
> 4051/4052/4054 (first all-in-one graphic desktop computers). Some of
> these were obsolete years before I started Tek in 1987, but I was using
> them in the late 1970's.
>
> When I was a University of Texas Electrical Engineering student back in
> the mid-1970's I built a device to compare the 3.5795454 MHz color burst
> NTSC television signal (from a normal TV set color reference oscillator)
> to an ovenized 5 MHz crystal oscillator using a 315/88 ratio TTL divider
> in the PLL. I used my Tektronix government surplus RM45A + CA plugin
> oscilloscope for this project. I also experimented with WWV 5/10/15 MHz
> frequency comparisons, but in Austin Texas the propagation from Ft
> Collins CO made this difficult to much better than 1 part in 10^7. The
> color burst method let me make use of the major TV network's rubidium
> standards. Unfortunately, by the late 1970's the networks were reading
> the monthly time deviation reports from NBS (name of NIST before 1988),
> and they would often manually readjust their rubidium standard magnetic
> field to get the frequency error in the NBS comparison closer to zero.
> Of course, this made the reliability of the time dissemination (phase of
> the color burst signal) unreliable. If they had just let the rubidium
> standard alone in a stable environment with no temperature or magnetic
> field changes, the drift in the timing error could have been modeled and
> corrections to the received signal made before reading the NBS monthly
> error reports.
>
> In my first job (late 70's to early 80's) we used Tektronix 7000 series
> CRT scopes to compare the output of a Tracor rubidium standard with a
> WWVB receiver and reference clocks in test instruments we were
> calibrating. We were considering building a commercial product based on
> my color burst recovery technique, but the random frequency adjustments
> by the networks and the switching between network and local station
> color burst reference clocks during local programming insertion caused
> us to abandon this project. This was about 7 years before I started at
> Tektronix.
>
> --
> Bill Byrom N5BB
>
>
>
> On Fri, Mar 20, 2015, at 12:02 PM, Robert LaJeunesse wrote:
> > While it may not be time-nut centric there is a great museum in
> > Michigan that has collections of both clocks and technology, along
> > with a couple Stradavarius violins and machinist tools used by Mr.
> > Daimler. The Henry Ford Museum in Dearborn, MI has been actively
> > enlarging their technology collection - having recently paid nearly $1
> > million for an original Apple I built by Jobs & Wozniak. They also
> > have Robert Moog's prototype music synthesizer. Might be time to
> > interest them in adding precision time to their clock and technology
> > collections.
> >
> > Bob LaJeunesse
> >
> >> Sent: Friday, March 20, 2015 at 1:33 AM From: "Bill Hawkins"
> >> <bill at iaxs.net> To: "'Tom Van Baak'" <tvb at leapsecond.com>,
> >> "'Discussion of precise time and frequency measurement'"
> >> <time-nuts at febo.com> Subject: Re: [time-nuts] Obscure HP T/F
> >> instruments in ebay.fr
> >>
> >> There are worse things than breaking up a collection.
> >>
> >> The Baaken Museum of Electricity in Life, near Minneapolis had a
> >> wonderful series of devices that used electricity to examine or
> >> prolong life, or to extract money from suckers. About 20 years ago,
> >> someone felt that there wasn't enough traffic at the museum, so the
> >> interesting exhibits were removed and the museum dumbed down for
> >> children. A vampire might greet you at the door.
> >>
> >> It seems that modern business managers have no time for things that
> >> don't draw crowds or fly off the shelves. If a museum or business
> >> wants to serve a market niche, it must compete with the incessant
> >> blizzard of advertising from the companies that just have to grow.
> >> Combine that with such companies expectations of productivity, and no
> >> one has time to search for interesting museums, never mind go to
> >> national parks.
> >>
> >> I would have been fascinated by and supportive of the French HP
> >> museum, had I known about it. I did not even dream such a place
> >> existed, but it makes sense that it was in Europe. Amsterdam has a
> >> science museum that lifts children's interest rather than going down
> >> to the lowest level to draw more people.
> >>
> >> In regard to dumbing down, the movie "Idiocracy" seems predictive.
> >>
> >> Bill Hawkins
> >>
> >> P.S. The Pavek Museum of Broadcasting (radio) is still hanging on.
> > _________________________________________________
> > time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the
> > instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>