[time-nuts] Divider circuit for Rubidium Standard
John Ackermann N8UR
jra at febo.com
Wed May 6 12:56:10 UTC 2015
Wenzel has published the schematic of an excellent squaring circuit. I
don't have the URL for their version handy, but I used it (with a couple
of mods) in the TADD-2 and TADD-2 Mini designs. You can see the
schematic in the T2-Mini users guide at
http://www.tapr.org/~n8ur/T2_Mini_Manual.pdf.
It will square up signals as low as -20dBm with very low jitter, and
provides a TTL-compatible output.
John
On 5/6/2015 2:52 AM, Bryan _ wrote:
> Hi Rick:
>
> Any suggestions for a circuit with better performance. Purpose will be a external standard for a frequency counter.
>
> -=Bryan=-
>
>> Date: Mon, 4 May 2015 21:09:51 -0700
>> From: richard at karlquist.com
>> To: time-nuts at febo.com
>> Subject: Re: [time-nuts] Divider circuit for Rubidium Standard
>>
>>
>>
>> On 4/26/2015 3:51 AM, Bryan _ wrote:
>>> All:
>>>
>>> P
>> I was looking at the project from David partridges web site
>> http://www.perdrix.co.uk/FrequencyDivider/index.html
>>
>>> -=Bryan=-
>>> _______________________________________________
>>>
>>
>> This is a comparator based circuit. This will give
>> you worse performance than just about anything else,
>> but it may be good enough anyway.
>>
>> Rick Karlquist N6RK
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list