[time-nuts] 3048A software question

[davidh]

Folks,

I'm also working on getting the MSDOS version running. What is the most 
recent version of DOS that people have found to work with the A 01.01 
version.

Also, can anyone advise where the command drivers for the 82335 can be 
found?

Cheers,

david

> Hi Adrian,
>
> Got the spec lines working now, thanks!
>
> Yes, the DOS version. I was hoping for an updated user manual for that version as the manual describes the other software version, and maybe a slightly later sw version. Oh well.
>
> Thanks for you help!
> Said
>
>
>
> On Feb 17, 2012, at 5:06, Adrian <rfnuts-KvP5wT2u2U0 at public.gmane.org> wrote:
>
>> Said,
>>
>> are you using the Opt. 311 (MS-DOS) software?
>> I don't know of any more recent versions.
>>
>> To answer your initial question:
>> You can not change anything on the diagram _after_ the measurement, not even the title.
>> The spec lines will be visible only when you have defined them prior to starting the measurement.
>>
>> Regards,
>> Adrian
>>
>>
>> SAIDJACK-YDxpq3io04c at public.gmane.org schrieb:
>>> Hello team,
>>>
>>> I am trying to get an HP 3048A system up and running, and I am having
>>> problems with enabling spec limit lines on the graph.
>>>
>>> I can enter the spec line data under the "manipulate results" then "spec
>>> lines" menu, but the lines I entered are not visible. There are the standard
>>> spec lines visible when I do the internal noise floor test, so I know this
>>> should work.
>>>
>>> Does anyone know how to enable these properly? The user manual doesn't talk
>>>   about this, and it is written for an older version of the software
>>> anyway's.
>>>
>>> Also, I have software version A 01.01 from 1994, does anyone have any more
>>> recent software version?
>>>
>>> Thanks in advance,
>>> Said
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts-JSkTLETqlTM at public.gmane.org
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts-JSkTLETqlTM at public.gmane.org
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>