[time-nuts] KS-24361 "NO GPS" - again

[Bob Camp]

Hi

Ok, when the interconnect cable goes out, the boxes simply do not boot up or
they boot to some strange pattern of LED’s. I have not seen the 15 pin cable 
impact the number of sat’s. It certainly *could* do so if the serial interconnect pin
is messed up on either end. 

I’d try another antenna ….

Bob

> On May 20, 2015, at 6:24 PM, Mod Mix <modmix at t-online.de> wrote:
> 
> Wall, again some hours later at least the LED show the normal picture.
> Though, Ulrich's program is still showing no more than two satellites.
> Do I have to be more patient?
> Ulli
> 
> Am 20.05.2015 um 20:59 schrieb Mod Mix:
>> Hi,
>> my KS-24361 REF 1 / REF 0 combo was running nicely for many weeks.
>> To check a newly received REF 0 it was connected instead of the nicely runnning one.
>> Did almost fine - except: NO GPS stayed solid on for about an hour.
>> At leat, i saw 1 or 2 satellites from time to time.
>> When I put back the original one, it behaves the same: solid NO GPS for hours .-(
>> Does not see any satellite at all...
>> Interconnect cable was changed...
>> GPS antenna was changed...
>> No success...
>> Any idea how to make it tracking GPS again?
>> Thank you in advance,
>> Ulli
>> 
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.