[time-nuts] PRS10 1 PPS Out having random phase jumps

[Mike Cook]

I’ve not seen this but have only used the 1PPS OUT for validating the perf. specs. I have seen no issues over 1-100000 secs. Over what time scales are you talking  ? Is the 1PPS IN being used to discipline the outputs?



> Le 23 nov. 2015 à 21:11, James Robbins <jsrobbins at earthlink.net> a écrit :
> 
> Has anyone using the 1 PPS output from a PRS10 rubidium found significant
> random phase jumps?  I'm getting these random phase jumps while using the
> PRS10 as a TI base for ADEV.  I can use the 10 MHz output of the PRS10 to
> feed a T2mini without any similar jumps.  Wondering if it might be heat
> related or other.  Needless to say, such jumps screw up the TI ADEV readings
> and convert the TimeLab readings from the E-12 range to E-1 or so.  Thanks.
> 
> 
> 
> Jim Robbins
> 
> N1JR
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.