[time-nuts] Rpair of an 8662 HP Generator
KA2WEU at aol.com
KA2WEU at aol.com
Sat Apr 16 02:07:02 UTC 2016
Thanks
In a message dated 4/15/2016 10:02:01 P.M. Eastern Daylight Time,
scmcgrath at gmail.com writes:
Silicon investigations repairs them. Google the name for website
Content by Scott
Typos by Siri
On Apr 15, 2016, at 6:38 PM, John Miles <john at miles.io> wrote:
>> My signal generator has a poor, intermittent power supply. The RF
>> section is ok. Who can please tell me which company can and will fix
these
>> older
>> but excellent generators?
>>
>> Thanks, Ulrich
>
> Have a look at the capacitors in the voltage divider that drives the
bases of the switching transistors. There's a good chance that's your
problem, and they probably need to be replaced even if not. 75-TVA1607 (Mouser
p/n for Sprague TVA1607) works well.
>
> It would be nice to use 105C parts if you can find some, but the 85C
TVA1607s have worked well for me in multiple 8662As over several years.
>
> The other likely suspect is one of the large screw-terminal
electrolytics on the motherboard. The power supply can almost-but-not-quite start up
when one of those is completely open. High ESR is very likely to cause
intermittent operation.
>
> -- john, KE5FX
> Miles Design LLC
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list