[time-nuts] GPSDO - probably a stupid question.
Nick Sayer
nsayer at kfu.com
Wed Aug 17 18:51:07 UTC 2016
Updating the EFC more quickly reduces the ADEV, though. I find that the fiddly part of tuning a GPSDO design is balancing the ADEV against phase control. If you want keep an iron fist on the phase, you can only do so by constantly swatting around the frequency.
I won't say that getting more frequent phase feedback is a bad thing, but if you're trying to get the PLL time constant to be longer rather than shorter that it won't help a lot.
Sent from my iPhone
> On Aug 17, 2016, at 9:57 AM, Peter Reilley <preilley_454 at comcast.net> wrote:
>
> You can get crystal oscillators that have a frequency control signal and are more
> stable than the run of the mill oscillators. Changing the GPS oscillator would
> require modifying a very tightly populated circuit board. Perhaps not possible.
>
> What about some of the SDR (software defined radio) projects that aim to
> implement GPS functionality? If you used the GPS chipping rate (1.023 MHz)
> to dicipline the 10 MHz oscillator then you are less sensitive to crystal instabilities.
> You are updating the crystal one million times a second rather than once per second.
> This is assuming that the chipping rate of the transmitter is just as good as the
> 1 PPS signal. This info from here;
> https://www.e-education.psu.edu/geog862/node/1753
> and here;
> https://en.wikipedia.org/wiki/GPS_signals
>
> Even using the 50 bits/sec data rate of the GPS signal would allow updating the
> GPSDO faster than the 1 PPS signal.
>
> Pete.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list