August 2016 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Aug 1 00:13:50 UTC 2016
Ending: Wed Aug 31 23:45:42 UTC 2016
Messages: 616

• [time-nuts] Q/noise of Earth as an oscillator   Tom Van Baak
• [time-nuts] Q/noise of Earth as an oscillator   Hal Murray
• [time-nuts] Q/noise of Earth as an oscillator   jimlux
• [time-nuts] Q/noise of Earth as an oscillator   Scott Stobbe
• [time-nuts] Q/noise of Earth as an oscillator   Bob Camp
• [time-nuts] Q/noise of Earth as an oscillator   Tom Van Baak
• [time-nuts] Q/noise of Earth as an oscillator   Gabs Ricalde
• [time-nuts] Q/noise of Earth as an oscillator   Tom Van Baak
• [time-nuts] Q/noise of Earth as an oscillator   Jim Palfreyman
• [time-nuts] Commercial software defined radio for clockmetrology   Kevin Rosenberg
• [time-nuts] Q/noise of Earth as an oscillator   Bill Byrom
• [time-nuts] Another arrival time histogram: SiRF III   Hal Murray
• [time-nuts] Q/noise of Earth as an oscillator   Hal Murray
• [time-nuts] Commercial software defined radio for clockmetrology   Magnus Danielson
• [time-nuts] Q/noise of Earth as an oscillator   Bill Byrom
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   David J Taylor
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Mark Sims
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Hal Murray
• [time-nuts] Very Accurate Delta Time RF Pulse Measurements   Didier Juges
• [time-nuts] Effect of EFC noise on phase noise   Attila Kinali
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Paul
• [time-nuts] Effect of EFC noise on phase noise   Poul-Henning Kamp
• [time-nuts] Effect of EFC noise on phase noise   Bob Camp
• [time-nuts] Q/noise of Earth as an oscillator   Tom Van Baak
• [time-nuts] Effect of EFC noise on phase noise   Attila Kinali
• [time-nuts] Effect of EFC noise on phase noise   KA2WEU at aol.com
• [time-nuts] Effect of EFC noise on phase noise   Bob Camp
• [time-nuts] Effect of EFC noise on phase noise   Attila Kinali
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Mark Sims
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Chris Albertson
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Chris Albertson
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Bob Camp
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   David J Taylor
• [time-nuts] Effect of EFC noise on phase noise   Poul-Henning Kamp
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Hal Murray
• [time-nuts] Q/noise of Earth as an oscillator   Glenn Little WB4UIV
• [time-nuts] Q/noise of Earth as an oscillator   Tom Van Baak
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Bob Camp
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Gary E. Miller
• [time-nuts] Q/noise of Earth as an oscillator   Hal Murray
• [time-nuts] Effect of EFC noise on phase noise   jimlux
• [time-nuts] Effect of EFC noise on phase noise   Scott Stobbe
• [time-nuts] Effect of EFC noise on phase noise   David
• [time-nuts] Effect of EFC noise on phase noise   Bob Camp
• [time-nuts] Q/noise of Earth as an oscillator   bg
• [time-nuts] Effect of EFC noise on phase noise   Bob Camp
• [time-nuts] Effect of EFC noise on phase noise   Scott Stobbe
• [time-nuts] Effect of EFC noise on phase noise   Bob Camp
• [time-nuts] Effect of EFC noise on phase noise   Dr. Ulrich Rohde
• [time-nuts] Effect of EFC noise on phase noise   Gerhard Hoffmann
• [time-nuts] Effect of EFC noise on phase noise   Scott Stobbe
• [time-nuts] Effect of EFC noise on phase noise   David
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Nick Sayer
• [time-nuts] Effect of EFC noise on phase noise   Bob Camp
• [time-nuts] Effect of EFC noise on phase noise   Hal Murray
• [time-nuts] Effect of EFC noise on phase noise   Bruce Griffiths
• [time-nuts] Effect of EFC noise on phase noise   Gerhard Hoffmann
• [time-nuts] Effect of EFC noise on phase noise   Alex Pummer
• [time-nuts] Effect of EFC noise on phase noise   Bruce Griffiths
• [time-nuts] Effect of EFC noise on phase noise   Charles Steinmetz
• [time-nuts] Effect of EFC noise on phase noise   Gerhard Hoffmann
• [time-nuts] Effect of EFC noise on phase noise   Gerhard Hoffmann
• [time-nuts] HP Panel colors   Steve DiMare
• [time-nuts] Another arrival time histogram: SiRF III   Magnus Danielson
• [time-nuts] Effect of EFC noise on phase noise   Bruce Griffiths
• [time-nuts] FDA1050 distrubution amplifier   Ole Stender Nielsen
• [time-nuts] Effect of EFC noise on phase noise   Gerhard Hoffmann
• [time-nuts] Adafruit Ultimate GPS timing message arrival times   Chris Albertson
• [time-nuts] Using the HP 58503a to correct your PC clock   Ron Ott
• [time-nuts] Using the HP 58503a to correct your PC clock   Chris Albertson
• [time-nuts] Effect of EFC noise on phase noise   Charles Steinmetz
• [time-nuts] Using the HP 58503a to correct your PC clock   David J Taylor
• [time-nuts] Sure GPS unit   Hal Murray
• [time-nuts] Sure GPS unit   David J Taylor
• [time-nuts] Using the HP 58503a to correct your PC clock   Bob Camp
• [time-nuts] Effect of EFC noise on phase noise   Charles Steinmetz
• [time-nuts] Effect of EFC noise on phase noise   Richard (Rick) Karlquist
• [time-nuts] Effect of EFC noise on phase noise   Charles Steinmetz
• [time-nuts] Commercial software defined radio for clock metrology   Sherman, Jeffrey A. (Fed)
• [time-nuts] Effect of EFC noise on phase noise   Brooke Clarke
• [time-nuts] Effect of EFC noise on phase noise   Gerhard Hoffmann
• [time-nuts] Effect of EFC noise on phase noise   David
• [time-nuts] Effect of EFC noise on phase noise   Bob Camp
• [time-nuts] Using the HP 58503a to correct your PC clock   Mark Sims
• [time-nuts] Using the HP 58503a to correct your PC clock   Ron Ott
• [time-nuts] standard fusion for accuracy and redundancy   Ruslan Nabioullin
• [time-nuts] Using the HP 58503a to correct your PC clock   Mark Sims
• [time-nuts] standard fusion for accuracy and redundancy   Attila Kinali
• [time-nuts] Using the HP 58503a to correct your PC clock   David
• [time-nuts] Using the HP 58503a to correct your PC clock   Ron Ott
• [time-nuts] Using the HP 58503a to correct your PC clock   cfo
• [time-nuts] Using the HP 58503a to correct your PC clock   David
• [time-nuts] Tardis [WAS: Using the HP 58503a to correct your PC clock]   Charles Steinmetz
• [time-nuts] GPS antenna selection   Herbert Poetzl
• [time-nuts] GPS antenna selection   Tom Miller
• [time-nuts] GPS antenna selection   Bob Camp
• [time-nuts] GPS antenna selection   Alex Pummer
• [time-nuts] NUT4NT: Four-channel All-frequency GNSS RF-to-Bits   Daniel Mendes
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Rick Jones
• [time-nuts] GPS antenna selection   Herbert Poetzl
• [time-nuts] Tardis [WAS: Using the HP 58503a to correct your PC clock]   Ron Ott
• [time-nuts] GPS antenna selection   Bob Camp
• [time-nuts] GPS antenna selection   Mark Sims
• [time-nuts] GPS antenna selection   Chris Albertson
• [time-nuts] GPS antenna selection   Chris Albertson
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Hal Murray
• [time-nuts] Using the HP 58503a to correct your PC clock   Chris Albertson
• [time-nuts] GPS antenna selection   Mark Sims
• [time-nuts] GPS antenna selection   Hal Murray
• [time-nuts] Tardis [WAS: Using the HP 58503a to correct your PC clock]   Hal Murray
• [time-nuts] GPS antenna selection   cfo
• [time-nuts] Using the HP 58503a to correct your PC clock   David J Taylor
• [time-nuts] GPS antenna selection   David J Taylor
• [time-nuts] GPS antenna selection   "Björn Gabrielsson"
• [time-nuts] GPS antenna selection   Hal Murray
• [time-nuts] GPS antenna selection   Hal Murray
• [time-nuts] Using the HP 58503a to correct your PC clock   Scott McGrath
• [time-nuts] GPS antenna selection — lightning   Eric Scace
• [time-nuts] Best choice for GPS active antenna voltage?   Nick Sayer
• [time-nuts] GPS antenna selection   albertson.chris at gmail.com
• [time-nuts] Using the HP 58503a to correct your PC clock   Ron Ott
• [time-nuts] GPS antenna selection — lightning   Bob Camp
• [time-nuts] Best choice for GPS active antenna voltage?   Bob Camp
• [time-nuts] GPS antenna selection   Tom Van Baak
• [time-nuts] GPS antenna selection — lightning   new
• [time-nuts] Using the HP 58503a to correct your PC clock   Magnus Danielson
• [time-nuts] GPS antenna selection — lightning   Ian Stirling
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   Tom Van Baak
• [time-nuts] Using the HP 58503a to correct your PC clock   Attila Kinali
• [time-nuts] GPS antenna selection — lightning   Attila Kinali
• [time-nuts] Using the HP 58503a to correct your PC clock   Rick Jones
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   KA2WEU at aol.com
• [time-nuts] Using the HP 58503a to correct your PC clock   Bob Camp
• [time-nuts] GPS antenna selection — lightning   Gary E. Miller
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   John Miles
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Rick Jones
• [time-nuts] Using the HP 58503a to correct your PC clock   Michael Wouters
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   KA2WEU at aol.com
• [time-nuts] GPS antenna selection — lightning   Alexander Pummer
• [time-nuts] GPS antenna selection — lightning   Chris Albertson
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Alexander Pummer
• [time-nuts] GPS antenna selection — lightning   Bob Camp
• [time-nuts] GPS antenna selection — lightning   Glenn Little WB4UIV
• [time-nuts] Venus838LPx-T preliminary testing   Nick Sayer
• [time-nuts] GPS antenna selection — lightning   Charles Steinmetz
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   Richard (Rick) Karlquist
• [time-nuts] GPS antenna selection — lightning   Hank Riley
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   Charles Steinmetz
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   Michael Wouters
• [time-nuts] Austron 2010B (disciplined OCXO) square wave conversion   Ruslan Nabioullin
• [time-nuts] Using the HP 58503a to correct your PC clock   Martin Burnicki
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Martin Burnicki
• [time-nuts] Using the HP 58503a to correct your PC clock   David J Taylor
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   KA2WEU at aol.com
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   KA2WEU at aol.com
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   KA2WEU at aol.com
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   Magnus Danielson
• [time-nuts] Austron 2010B (disciplined OCXO) square wave conversion   Bob Camp
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   paul swed
• [time-nuts] GPS antenna selection - lightning   Glenn Little WB4UIV
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Bob Camp
• [time-nuts] GPS antenna selection - lightning   Clay Autery
• [time-nuts] GPS antenna selection - lightning   Chris Albertson
• [time-nuts] GPS antenna selection - lightning   Glenn Little WB4UIV
• [time-nuts] Austron 2010B (disciplined OCXO) square wave conversion   Charles Steinmetz
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   KA2WEU at aol.com
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   KA2WEU at aol.com
• [time-nuts] Austron 2010B (disciplined OCXO) square wave conversion   Jim Stone
• [time-nuts] GPS antenna selection - lightning   Chris Albertson
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   Magnus Danielson
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   Bob Camp
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   ziggy9+time-nuts at pumpkinbrook.com
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   KA2WEU at aol.com
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   Magnus Danielson
• [time-nuts] Oscillator Phase Noise: A 50-Year Review   jimlux
• [time-nuts] How does sawtooth compensation work?   Bill Byrom
• [time-nuts] GPS antenna selection - lightning   Bill Hawkins
• [time-nuts] GPS antenna selection - lightning   Bob Stewart
• [time-nuts] How does sawtooth compensation work?   David
• [time-nuts] Speaking clock   Morris Odell
• [time-nuts] Speaking clock   Edesio Costa e Silva
• [time-nuts] GPS antenna selection - lightning   jimlux
• [time-nuts] Speaking clock   Artek Manuals
• [time-nuts] GPS antenna selection - lightning   Bob Camp
• [time-nuts] Speaking clock   Clint Jay
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Rick Jones
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Stewart
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Albert
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Hal Murray
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Camp
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Stewart
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Tom Miller
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Stewart
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Albert
• [time-nuts] Heathkit clock available   Nick Sayer
• [time-nuts] Venus838LPx-T preliminary testing   Nick Sayer
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   David
• [time-nuts] Venus838LPx-T preliminary testing   Clay Autery
• [time-nuts] Heathkit clock available   Alexander Pummer
• [time-nuts] Venus838LPx-T preliminary testing   Nick Sayer
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Albert
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Richard W. Solomon
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Scott Stobbe
• [time-nuts] Venus838LPx-T preliminary testing   Mark Sims
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Hal Murray
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Albert
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   David
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Clint Jay
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Hal Murray
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Dr. David Kirkby (Kirkby Microwave Ltd)
• [time-nuts] Speaking clock   Morris Odell
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Tim Shoppa
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Chuck Harris
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   David J Taylor
• [time-nuts] Venus838LPx-T preliminary testing   Nick Sayer
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Albert
• [time-nuts] Venus838LPx-T preliminary testing   Mark Sims
• [time-nuts] Heathkit clock available   Brooke Clarke
• [time-nuts] Venus838LPx-T preliminary testing   Nick Sayer
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Chris Albertson
• [time-nuts] Working with SMT parts.   Brooke Clarke
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Brooke Clarke
• [time-nuts] Manual for Trimble Placer Gold APU   Peter Vince
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   ziggy9+time-nuts at pumpkinbrook.com
• [time-nuts] Larus STS54500   Bill
• [time-nuts] Heathkit clock available   Bill Hawkins
• [time-nuts] Venus838LPx-T preliminary testing   Mike Cook
• [time-nuts] Shera revisted   EWKehren at aol.com
• [time-nuts] Venus838LPx-T preliminary testing   Mark Sims
• [time-nuts] Venus838LPx-T preliminary testing   Nick Sayer
• [time-nuts] Heathkit clock available   Nick Sayer
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   David
• [time-nuts] Shera revisted   Chris Albertson
• [time-nuts] Questions on Nortel Trimble NTBW50AA GPSTM   Clay Autery
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Tim Shoppa
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Albert
• [time-nuts] Heathkit clock available   Brooke Clarke
• [time-nuts] Heathkit clock available   Artek Manuals
• [time-nuts] Shera revisted   Joakim Langlet
• [time-nuts] Questions on Nortel Trimble NTBW50AA GPSTM   Mark Sims
• [time-nuts] Questions on Nortel Trimble NTBW50AA GPSTM   Bob Camp
• [time-nuts] FDA1050 distribution amplifier   Ole Stender Nielsen
• [time-nuts] Heathkit clock available   David
• [time-nuts] State of the art of crystal oscillator measurements   KA2WEU at aol.com
• [time-nuts] Questions on Nortel Trimble NTBW50AA GPSTM   Clay Autery
• [time-nuts] State of the art of crystal oscillator measurements   KA2WEU at aol.com
• [time-nuts] Commercial software defined radio for clockmetrology   Kevin Rosenberg
• [time-nuts] Questions on Nortel Trimble NTBW50AA GPSTM   Mark Sims
• [time-nuts] State of the art of crystal oscillator measurements   Tom Van Baak
• [time-nuts] Heathkit clock available   Nick Sayer
• [time-nuts] State of the art of crystal oscillator measurements   Mike Feher
• [time-nuts] Heathkit clock available   Chris Albertson
• [time-nuts] Shera revisted   Chris Albertson
• [time-nuts] Heathkit clock available   Adrian Godwin
• [time-nuts] Shera revisted   Michael Wouters
• [time-nuts] Mini ovens packaging   Guillermo Sobreviela Falces
• [time-nuts] Shera revisted   Joakim Langlet
• [time-nuts] PRS10   Martyn Smith
• [time-nuts] State of the art of crystal oscillator measurements   KA2WEU at aol.com
• [time-nuts] Shera revisted   Bob Camp
• [time-nuts] Heathkit clock available   jimlux
• [time-nuts] Shera revisted   jimlux
• [time-nuts] State of the art of crystal oscillator measurements   Mike Feher
• [time-nuts] Looking to find an antenna for a TrueTime XL-DC   Gregory Beat
• [time-nuts] State of the art of crystal oscillator measurements   David J Taylor
• [time-nuts] KO4BB Manuals   Didier Juges
• [time-nuts] Shera revisted   bownes
• [time-nuts] Working with SMT parts.   Didier Juges
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Bob Stewart
• [time-nuts] PRS10   Mike Cook
• [time-nuts] Working with SMT parts.   Bob Albert
• [time-nuts] State of the art of crystal oscillator measurements   Richard (Rick) Karlquist
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Didier Juges
• [time-nuts] Working with SMT parts.   Bob Stewart
• [time-nuts] Working with SMT parts.   Brooke Clarke
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Brooke Clarke
• [time-nuts] Working with SMT parts.   Bob Darlington
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Bob Stewart
• [time-nuts] Working with SMT parts.   Brooke Clarke
• [time-nuts] Shera revisted   Attila Kinali
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Bob Stewart
• [time-nuts] State of the art of crystal oscillator measurements   Mike Feher
• [time-nuts] Working with SMT parts.   Chuck Harris
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Bob Camp
• [time-nuts] Safely getting the electrical length of a connectedantenna feedline   Tom Van Baak
• [time-nuts] State of the art of crystal oscillator measurements   John Miles
• [time-nuts] State of the art of crystal oscillator measurements   KA2WEU at aol.com
• [time-nuts] State of the art of crystal oscillator measurements   John Miles
• [time-nuts] Working with SMT parts.   Graham / KE9H
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Bob Stewart
• [time-nuts] State of the art of crystal oscillator measurements   KA2WEU at aol.com
• [time-nuts] State of the art of crystal oscillator measurements   Tom Holmes
• [time-nuts] State of the art of crystal oscillator measurements   Bob Camp
• [time-nuts] State of the art of crystal oscillator measurements   Richard (Rick) Karlquist
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Attila Kinali
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Bob Stewart
• [time-nuts] State of the art of crystal oscillator measurements   John Miles
• [time-nuts] State of the art of crystal oscillator measurements   KA2WEU at aol.com
• [time-nuts] State of the art of crystal oscillator measurements   John Miles
• [time-nuts] State of the art of crystal oscillator measurements   Mike Feher
• [time-nuts] Working with SMT parts.   Bob Bownes
• [time-nuts] State of the art of crystal oscillator measurements   John Miles
• [time-nuts] Working with SMT parts.   Steve
• [time-nuts] State of the art of crystal oscillator measurements   Mike Feher
• [time-nuts] Safely getting the electrical length of a connected, antenna feedline   Joe Leikhim
• [time-nuts] State of the art of crystal oscillator measurements   KA2WEU at aol.com
• [time-nuts] State of the art of crystal oscillator measurements   Richard (Rick) Karlquist
• [time-nuts] Working with SMT parts.   Brooke Clarke
• [time-nuts] State of the art of crystal oscillator measurements   John Miles
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Bob Camp
• [time-nuts] Working with SMT parts.   Chris Albertson
• [time-nuts] Working with SMT parts.   Chris Albertson
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Bob Stewart
• [time-nuts] Working with SMT parts.   Bob Albert
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Didier Juges
• [time-nuts] Safely getting the electrical length of a connectedantenna feedline   Didier Juges
• [time-nuts] Working with SMT parts.   Didier Juges
• [time-nuts] Shera revisted   Paul Boven
• [time-nuts] Safely getting the electrical length of a connected antenna feedline   Scott McGrath
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Bob Camp
• [time-nuts] Working with SMT parts.   Bob Camp
• [time-nuts] Working with SMT parts.   Scott McGrath
• [time-nuts] Mini ovens packaging   Bob Camp
• [time-nuts] Working with SMT parts.   wb6bnq
• [time-nuts] Shera revisted   Bob Camp
• [time-nuts] Working with SMT parts.   Chuck Harris
• [time-nuts] Working with SMT parts.   Tom Miller
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Chris Albertson
• [time-nuts] Shera revisted   David
• [time-nuts] Working with SMT parts.   David
• [time-nuts] Heathkit clock available   Tom Van Baak
• [time-nuts] Heathkit clock available   Ryan Stasel
• [time-nuts] Low cost SDR suitable for phase noise measurement?   Wes
• [time-nuts] Shera revisted   Bruce Griffiths
• [time-nuts] Mini ovens packaging   Attila Kinali
• [time-nuts] Shera revisted   Attila Kinali
• [time-nuts] Heathkit clock available   Alex Pummer
• [time-nuts] Working with SMT parts.   Didier Juges
• [time-nuts] Working with SMT parts.   Didier Juges
• [time-nuts] Heathkit clock available   Bill Hawkins
• [time-nuts] Working with SMT parts.   Brooke Clarke
• [time-nuts] Working with SMT parts.   Brooke Clarke
• [time-nuts] Heathkit clock available   Hal Murray
• [time-nuts] Working with SMT parts.   Chuck Harris
• [time-nuts] Working with SMT parts.   Bob Albert
• [time-nuts] Working with SMT parts.   Tim Tuck
• [time-nuts] Working with SMT parts.   Chris Albertson
• [time-nuts] Working with SMT parts.   Orin Eman
• [time-nuts] Working with SMT parts.   wb6bnq
• [time-nuts] Working with SMT parts.   Poul-Henning Kamp
• [time-nuts] Working with SMT parts.   Ian Stirling
• [time-nuts] Working with SMT parts.   Adrian Godwin
• [time-nuts] Working with SMT parts.   Didier Juges
• [time-nuts] Mini ovens packaging   Didier Juges
• [time-nuts] Mini ovens packaging   Magnus Danielson
• [time-nuts] Working with SMT parts.   William H. Fite
• [time-nuts] Working with SMT parts.   Chris Albertson
• [time-nuts] NUT4NT: Four-channel All-frequency GNSS RF-to-Bits   Gregory Maxwell
• [time-nuts] Working with SMT parts.   Clint Jay
• [time-nuts] Working with SMT parts.   Bob Camp
• [time-nuts] Subject: Re: Working with SMT parts   Michael Seibel
• [time-nuts] Working with SMT parts.   Charles Steinmetz
• [time-nuts] NUT4NT: Four-channel All-frequency GNSS RF-to-Bits   Michael Wouters
• [time-nuts] NUT4NT: Four-channel All-frequency GNSS RF-to-Bits   Bob Camp
• [time-nuts] NUT4NT: Four-channel All-frequency GNSS RF-to-Bits   Gregory Maxwell
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] NUT4NT: Four-channel All-frequency GNSS RF-to-Bits   Mark Sims
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Chris Albertson
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Attila Kinali
• [time-nuts] Galileo NAGU mailinglist   Attila Kinali
• [time-nuts] 8FSM proceedings   Attila Kinali
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Attila Kinali
• [time-nuts] NVS NV08C   Michael Wouters
• [time-nuts] NUT4NT: Four-channel All-frequency GNSS RF-to-Bits   Bob Camp
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] Commercial software defined radio for clockmetrology   Magnus Danielson
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Chris Albertson
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Paul
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] Mini ovens packaging   Guillermo Sobreviela Falces
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Scott Stobbe
• [time-nuts] Venus838LPx-T preliminary testing   Nick Sayer
• [time-nuts] Trimble Troubles   Colin Haig
• [time-nuts] Venus838LPx-T preliminary testing   Mark Sims
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Paul
• [time-nuts] Mini ovens packaging   Bob Camp
• [time-nuts] Venus838LPx-T preliminary testing   Bob Camp
• [time-nuts] Lady Heather   Richard Mogford
• [time-nuts] Allen Osborne Associates TTR-6   Jeff Sanders
• [time-nuts] HP 3010Axxxxx oscillator   Perry Sandeen
• [time-nuts] Holdover   Bob Stewart
• [time-nuts] Lady Heather   Mark Sims
• [time-nuts] Mini ovens packaging   Attila Kinali
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Attila Kinali
• [time-nuts] HP 3010Axxxxx oscillator   cdelect at juno.com
• [time-nuts] Holdover   Attila Kinali
• [time-nuts] Holdover   Bob Stewart
• [time-nuts] Holdover   Attila Kinali
• [time-nuts] HP 3010Axxxxx oscillator   Charles Steinmetz
• [time-nuts] Holdover   Bob Stewart
• [time-nuts] Lady Heather   John Miles
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Paul
• [time-nuts] Holdover   Magnus Danielson
• [time-nuts] Holdover   Bob Stewart
• [time-nuts] Holdover   Chris Albertson
• [time-nuts] GPSDO - probably a stupid question.   Peter Reilley
• [time-nuts] Lady Heather   Mark Sims
• [time-nuts] Holdover   Mark Sims
• [time-nuts] Holdover   Bob Stewart
• [time-nuts] Subject: Re: Working with SMT parts   Bob Albert
• [time-nuts] Holdover   Magnus Danielson
• [time-nuts] Holdover   Bob Stewart
• [time-nuts] GPSDO - probably a stupid question.   Pete Stephenson
• [time-nuts] GPSDO - probably a stupid question.   Bruce Griffiths
• [time-nuts] Holdover   Azelio Boriani
• [time-nuts] GPSDO - probably a stupid question.   "Björn Gabrielsson"
• [time-nuts] Trimble Troubles   Vlad
• [time-nuts] GPSDO - probably a stupid question.   Chris Albertson
• [time-nuts] GPSDO - probably a stupid question.   Nick Sayer
• [time-nuts] GPSDO - probably a stupid question.   Peter Reilley
• [time-nuts] Lady Heather Data Explained?   Richard Mogford
• [time-nuts] Holdover   Magnus Danielson
• [time-nuts] GPSDO - probably a stupid question.   Didier Juges
• [time-nuts] GPSDO - probably a stupid question.   Nick Sayer
• [time-nuts] Speaking clock   Didier Juges
• [time-nuts] Lady Heather Data Explained?   William H. Fite
• [time-nuts] GPSDO - probably a stupid question.   Mark Sims
• [time-nuts] GPSDO - probably a stupid question.   Jay Grizzard
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   Ed Palmer
• [time-nuts] GPSDO - probably a stupid question.   KA2WEU at aol.com
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Jim Stone
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Jim Stone
• [time-nuts] GPSDO - probably a stupid question.   Clint Jay
• [time-nuts] GPSDO - probably a stupid question.   Bob kb8tq
• [time-nuts] GPSDO - probably a stupid question.   Nick Sayer
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   Bob Camp
• [time-nuts] GPSDO - probably a stupid question.   Magnus Danielson
• [time-nuts] Speaking clock   William H. Fite
• [time-nuts] Lady Heather Data Explained?   Jeff AC0C
• [time-nuts] GPSDO - probably a stupid question.   Bob Camp
• [time-nuts] GPSDO - probably a stupid question.   Didier Juges
• [time-nuts] Lady Heather Data Explained?   Mark Sims
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   paul swed
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   Ed Palmer
• [time-nuts] Heathkit clock available   Brian Lloyd
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   Chuck Harris
• [time-nuts] GPSDO - probably a stupid question.   Charles Steinmetz
• [time-nuts] GPSDO - probably a stupid question.   Magnus Danielson
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Bob Albert
• [time-nuts] Speaking clock   David J Taylor
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Steve Wiseman
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   Ed Palmer
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   Ed Palmer
• [time-nuts] GPSDO - probably a stupid question.   Bob kb8tq
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Bob Albert
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   Chuck Harris
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Chuck Harris
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Bob Albert
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Bob Albert
• [time-nuts] Noisy Sulzer 2.5 - Suggestions?   paul swed
• [time-nuts] Status: time-nuts mailing list & moderation   Tom Van Baak
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Chuck Harris
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Chuck Harris
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Oz-in-DFW
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Bob Albert
• [time-nuts] Subject: Re: Working with SMT parts   Charles Steinmetz
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Bob Stewart
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Bob Albert
• [time-nuts] Subject: Re: Working with SMT parts (Bob Albert)   Graham / KE9H
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Tim Lister
• [time-nuts] Holdover   lincoln
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Chris Caudle
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Bob Stewart
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Hal Murray
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Tim Lister
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Mark Sims
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Bob kb8tq
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Hal Murray
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Bryan _
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Charles Steinmetz
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Bob kb8tq
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Bob kb8tq
• [time-nuts] Expected 10 MHz offset from a GPSDO?   Bob kb8tq
• [time-nuts] Austron Phase Stepper Manual needed   g4gjl at btopenworld.com
• [time-nuts] DIY VNA design   Attila Kinali
• [time-nuts] DIY VNA design   Richard (Rick) Karlquist
• [time-nuts] DIY VNA design   Bob Albert
• [time-nuts] DIY VNA design   Orin Eman
• [time-nuts] DIY VNA design   Bob Albert
• [time-nuts] DIY VNA design   David J Taylor
• [time-nuts] DIY VNA design   Attila Kinali
• [time-nuts] DIY VNA design   Wes
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] DIY VNA design, directional coupler   Alex Pummer
• [time-nuts] DIY VNA design, directional coupler   Attila Kinali
• [time-nuts] DIY VNA design, directional coupler   Alexander Pummer
• [time-nuts] DIY VNA design   Dr. David Kirkby (Kirkby Microwave Ltd)
• [time-nuts] DIY VNA design   Bob kb8tq
• [time-nuts] DIY VNA design   bownes
• [time-nuts] DIY VNA design   Bob kb8tq
• [time-nuts] time-nuts Digest, Vol 145, Issue 41/AUSTRON PHASE STEPPER MANUAL   Williamson, Cary Michael
• [time-nuts] DIY VNA design, directional coupler   Charles Steinmetz
• [time-nuts] DIY VNA design   Dr. David Kirkby (Kirkby Microwave Ltd)
• [time-nuts] DIY VNA design [VNA-Nuts?]   Oz-in-DFW
• [time-nuts] DIY VNA design [VNA-Nuts?]   Tom Miller
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Scott Stobbe
• [time-nuts] DIY VNA design [VNA-Nuts?]   Bob Bownes
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] 5061A Beam Current went high   Pete Lancashire
• [time-nuts] 5061A Beam Current went high   Brian, WA1ZMS
• [time-nuts] DIY VNA design [VNA-Nuts?]   Attila Kinali
• [time-nuts] DIY VNA design [VNA-Nuts?]   Wes
• [time-nuts] 5061A Beam Current went high   Poul-Henning Kamp
• [time-nuts] DIY VNA design [VNA-Nuts?]   David & Laura
• [time-nuts] negative mention of products (was: DIY VNA design)   Attila Kinali
• [time-nuts] negative mention of products (was: DIY VNA design)   Poul-Henning Kamp
• [time-nuts] negative mention of products (was: DIY VNA design)   Dr. David Kirkby (Kirkby Microwave Ltd)
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   André Esteves
• [time-nuts] negative mention of products (was: DIY VNA design)   William H. Fite
• [time-nuts] GPS for Nixie Clock   Mark Sims
• [time-nuts] DIY VNA design   Richard (Rick) Karlquist
• [time-nuts] negative mention of products (was: DIY VNA design)   Chris Albertson
• [time-nuts] DIY VNA design   Jim Cotton
• [time-nuts] For Sale Reference Synthesizer for Microwave "Brick"   Joe Leikhim
• [time-nuts] DIY VNA design   jimlux
• [time-nuts] DIY VNA design [VNA-Nuts?]   David
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] DIY VNA design [VNA-Nuts?]   Hal Murray
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] DIY VNA design [VNA-Nuts?]   Attila Kinali
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Attila Kinali
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   David J Taylor
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Paul
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   Scott Stobbe
• [time-nuts] GPS for Nixie Clock   Brooke Clarke
• [time-nuts] DIY VNA design   Brooke Clarke
• [time-nuts] For Sale Reference Synthesizer for Microwave "Brick"   Lester Veenstra
• [time-nuts] For Sale Reference Synthesizer for Microwave "Brick"   Lester Veenstra
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Magnus Danielson
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Dave Brown
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Hal Murray
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Magnus Danielson
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   David
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Magnus Danielson
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Bob kb8tq
• [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd   STR .
• [time-nuts] Confidential -Review Signed Contract   David Jensen
• [time-nuts] 270 fs clock accuracy achieved at UCLA   Russ Ramirez
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Bruce Griffiths
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   André Esteves
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Bruce Griffiths
• [time-nuts] Optical link connects atomic clocks over 1400 kmof fibre   David J Taylor
• [time-nuts] Optical link connects atomic clocks over 1400 kmof fibre   Bruce Griffiths
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Charles Steinmetz
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Poul-Henning Kamp
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Bill Metzenthen
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Bob kb8tq
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Magnus Danielson
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Alex Pummer
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Hal Murray
• [time-nuts] Questions on Nortel Trimble NTBW50AA GPSTM   EB4APL
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Bill Metzenthen
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Hal Murray
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Dave Brown
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   Bill Metzenthen
• [time-nuts] Optical link connects atomic clocks over 1400 km of fibre   jimlux
• [time-nuts] 3D printed sundial displays the time digitally [Youtube Link]   Oz-in-DFW
• [time-nuts] 3D printed sundial displays the time digitally [Youtube Link]   Bob kb8tq
• [time-nuts] Ashtech Z-12 firmware?   Gregory Maxwell
• [time-nuts] Ashtech Z-12 firmware?   bg
• [time-nuts] Ashtech Z-12 firmware?   Magnus Danielson
• [time-nuts] SR620 Problem   Don at True-Cal
• [time-nuts] SR620 Problem   Don at True-Cal
• [time-nuts] SR620 Problem   Tom Miller
• [time-nuts] SR620 Problem   Charles Steinmetz
• [time-nuts] SR620 Problem   Alexander Pummer
• [time-nuts] SR620 Problem   Don at True-Cal
• [time-nuts] SR620 Problem   Alexander Pummer
• [time-nuts] 270 fs clock accuracy achieved at UCLA   Bill Byrom
• [time-nuts] Efratom M-100 Rubidium   Dave M
• [time-nuts] Anybody want a Thunderbolt power supply?   Nick Sayer
• [time-nuts] Anybody want a Thunderbolt power supply?   Cube Central
• [time-nuts] Anybody want a Thunderbolt power supply?   Mark Sims
• [time-nuts] Sunrise, solar noon, sunset and the Equation of Time   Mark Sims
• [time-nuts] Anybody want a Thunderbolt power supply?   Nick Sayer
• [time-nuts] Anybody want a Thunderbolt power supply?   DaveH
• [time-nuts] Sunrise, solar noon, sunset and the Equation of Time   David J Taylor
• [time-nuts] Anybody want a Thunderbolt power supply?   Charles Steinmetz
• [time-nuts] Anybody want a Thunderbolt power supply?   Jerry O. Stern
• [time-nuts] Anybody want a Thunderbolt power supply?   Clint Jay
• [time-nuts] You will be aware of the three different definitions of sunset, of course.   Mark Sims
• [time-nuts] Anybody want a Thunderbolt power supply?   Charles Steinmetz
• [time-nuts] Anybody want a Thunderbolt power supply?   Mark Sims
• [time-nuts] Anybody want a Thunderbolt power supply?   Charles Steinmetz
• [time-nuts] Anybody want a Thunderbolt power supply?   jimlux
• [time-nuts] Anybody want a Thunderbolt power supply?   jimlux
• [time-nuts] Anybody want a Thunderbolt power supply?   Edesio Costa e Silva
• [time-nuts] Anybody want a Thunderbolt power supply?   Mark Sims
• [time-nuts] Anybody want a Thunderbolt power supply?   Chris Caudle
• [time-nuts] Anybody want a Thunderbolt power supply?   Adrian Godwin
• [time-nuts] Anybody want a Thunderbolt power supply?   jimlux
• [time-nuts] Anybody want a Thunderbolt power supply?   Charles Steinmetz
• [time-nuts] Anybody want a Thunderbolt power supply?   Charles Steinmetz
• [time-nuts] Anybody want a Thunderbolt power supply?   Bob Stewart
• [time-nuts] Anybody want a Thunderbolt power supply?   Charles Steinmetz
• [time-nuts] Anybody want a Thunderbolt power supply?   Charles Steinmetz
• [time-nuts] Anybody want a Thunderbolt power supply?   Bob Stewart
• [time-nuts] Anybody want a Thunderbolt power supply?   Bob kb8tq
• [time-nuts] Anybody want a Thunderbolt power supply?   Cube Central
• [time-nuts] Anybody want a Thunderbolt power supply?   Alexander Pummer
• [time-nuts] Anybody want a Thunderbolt power supply?   Charles Steinmetz
• [time-nuts] Anybody want a Thunderbolt power supply?   Nick Sayer
• [time-nuts] Anybody want a Thunderbolt power supply   Mike Naruta AA8K

Last message date: Wed Aug 31 23:45:42 UTC 2016
Archived on: Thu Apr 1 17:02:04 UTC 2021

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...