[time-nuts] Problem with HP 83623A 20 GHz sweep generator stepping up/down 100 Hz when not wanted.
Scott McGrath
scmcgrath at gmail.com
Thu Dec 22 02:54:19 UTC 2016
Can you use the VNA as a receiver? And determine whether the 100Hz shift is also seen on the VNA
> On Dec 21, 2016, at 7:31 PM, Dr. David Kirkby (Kirkby Microwave Ltd) <drkirkby at kirkbymicrowave.co.uk> wrote:
>
> On 21 December 2016 at 23:42, Dr. David Kirkby (Kirkby Microwave Ltd) <
> drkirkby at kirkbymicrowave.co.uk> wrote:
>
>
>> But one thing to possibly is
>>
>> * Set sweep generator to 10.368 GHz
>> * Set sweep generator to 10.378 GHz, so there's a 10 MHz difference.
>
>
> I mean set the VNA to 10.378 GHz, so there's a 10 MHz difference between
> the VNA and sweep generator.
>
> Dave
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list