[time-nuts] Tait reference
jherrero at hvsistemas.es
Mon Jan 11 03:55:46 EST 2016
Tait T800 is a series of mobile radio repeaters, so probably the T801
could be a unit intended for iso-frequency networks, in which there are
several repeaters are distributed in a wide area operating all at the
same frequencies with a very tight tolerance. BNCs and 13.8V power
supplies are very common in the mobile radio networks world.
On 11/01/2016 4:00, Bob Camp wrote:
> Unless we are looking at different auctions, that one appears to want 13.8 V at <= 5A
> as the supply.
> The BNC’s are also a fairly rare item in the Telco inventory (but not unheard of).
> If I had to bet, I’d say it’s a piece of mobile video gear. I would not bet anything over
> about a nickel on that being correct. It’s very much a mystery item other than possibly
> having an offset frequency translation function.
>> On Jan 10, 2016, at 8:35 PM, paul swed <paulswedb at gmail.com> wrote:
>> What little I can tell is they are telco references so there may be
>> something good inside OCXO or RB. It looks like it runs on -48VDC from the
>> ebay pix. Its output could be any of the typical telco references that are
>> not 5 or 10 MHz. These are pure guesses. The Price seems reasonable.
>> Good luck
>> On Sun, Jan 10, 2016 at 6:48 PM, Adrian Godwin <artgodwin at gmail.com> wrote:
>>> Are these the references with a rubidium oscillator ? They seem to have
>>> similar models with OCXOs etc.
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>>> and follow the instructions there.
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts