[time-nuts] Lady Heather Server On Raspberry Pi 2 Model B?
eds_equipment at verizon.net
Tue Jan 12 03:58:46 EST 2016
More details please. I've installed it, but can't make it work. My
USB/serial cable is /dev/ttyUSB0 just like yours. I used your .conf
file. But lady heather says connection rejected.
On 1/11/2016 8:00 PM, Nick Sayer via time-nuts wrote:
> I answered my own question. :)
> ser2net works perfectly as a “server” for LH. I’m using a USB to serial adapter and the ser2net.conf line for it is
> 3200:raw:0:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT LOCAL
> And for LH, /ip=n.n.n.n:3200 works.
>> On Jan 11, 2016, at 9:30 AM, Nick Sayer via time-nuts <time-nuts at febo.com> wrote:
>> How about a simpler question. I see in the documentation that LH can use a network connection to remotely read. Can a server for that protocol be made for the RPi? That would be super awesome deluxe for me, and assuming it's just a serial-to-TCP protocol should be nearly trivial to write (heck, netcat might already just do it).
>> Sent from my iPhone
>> On Jan 10, 2016, at 4:31 PM, Mark Sims <holrum at hotmail.com> wrote:
>>>> I wonder if I've got anywhere near the skills to do it...
>>> Probably not right now... it's not so much as knowing C, it's knowing the ins and out of knowing how your operating system (Windows, Linux, etc) interfaces with your hardware (display, mouse, serial port, keyboard). Basically, if you have to ask the question, your are probably not ready to attempt the task.
>>> Lady Heather is a pretty simple program, but it is rather long and divided into 5 files. Just getting set up to compile it in a new environment can be quite a challenge to the un-initiated (acouple of toupees worth of hair pulling once you can compile and link a simple "hello world" program.
>>> Then you need to figure out how to draw dots and characters, talk to the serial port, talk to the mouse, talk to the keyboard. Pretty basic stuff once you are familiar with your operating system/environment, but not something most people do everyday...
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts