[time-nuts] HP5370 power supply measurements
Chuck Harris
cfharris at erols.com
Fri Jul 15 14:06:44 UTC 2016
It is important to remember that the fans specified in
most of this equipment are sized so that the instrument
can operate safely, in a rack full of equipment, at the
maximum temperature rating for the instrument.
If you plan to run at a comfortable room temperature,
you can usually get by with a much smaller fan.
It might be nice to leave a label somewhere that says
what you did, so the next owner won't be unpleasantly
surprised by it failing in his desert tent.
-Chuck Harris
Dr. David Kirkby (Kirkby Microwave Ltd) wrote:
> On 13 Jul 2016 08:31, "Charles Steinmetz" <csteinmetz at yandex.com> wrote:
>
>> An external fan blowing on the heatsink keeps my 5370s nice and cool, for
> about $10 each.
>
> So more noise.
>
>> *if the counters were operated 24/7/365*. I sometimes take data for a
> few months straight, but very, very far from 24/7/365 on average. So for
> me, break-even would be more like 50 years.
>
> I don't suppose Poul's main motivation is to reduce his electric bill.
>
>> Speaking of fan noise -- you can't really get away with replacing the
> internal fan with one that moves less air, so it is hard to find a
> replacement that generates significantly less noise. If you find one,
> please share the make and model -- all 5370 owners would love to know.
>>
>> Best regards,
>>
>> Charles
>
> Surely one of the main advantages of the SMPS route is the higher
> efficiently means less cooling air is required. That means less noise.
>
> I often here of people replacing fans with quiter ones, but I suspect that
> all they really do is reduce the airflow. I believe that most of the noise
> one hears is the movement of the air. From what I have read, sleve bearing
> fans make a bit less noise than ball bearings fans. However, although the
> MTBF of both types is similar at 20 degree C, the MTBF of sleve bearing
> fans decreases quite a bit with only a modest increase in temperature.
>
> Dave.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list