[time-nuts] TU60-D120-131 Specs....?

[Götz Romahn]

may be this zip-file from James Miller helps to set up the Jupiter properly:
http://www.jrmiller.demon.co.uk/projects/ministd/jupcom.zip
Götz


Am 29.06.2016 um 10:45 schrieb Bryan _:
>
>
>
> Sorry to be so dense on this but doesn't the unit just default to the Jupiter-T command set on power up. I should be able to just enter @@Cj and receive the (manufacturer name, model, serial number and software revision ) shouldn't I?
>
>
> -=Bryan=-
>
>> From: holrum at hotmail.com
>> To: time-nuts at febo.com
>> Date: Wed, 29 Jun 2016 02:42:50 +0000
>> Subject: [time-nuts] TU60-D120-131 Specs....?
>>
>> "@ @ W b 0x01 cksum 0x0D 0x0A"  will switch from Motorola mode to Zodiac mode.  The checksum is the XOR of all bytes after the @@ and before the cksum byte.  The 0x?? values represent binary bytes.  The spaces are for clarity and are not sent. 		 	   		
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
>  		 	   		
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>

-- 
Götz Romahn