[time-nuts] FS HP 5335A
Bob Stewart
bob at evoria.net
Tue May 17 23:08:27 UTC 2016
Hi,
I know this is a for sale post, but there's a jumper that needs to be there to work with the regulator oscillator. Page 2-4 of the Operating and Service Manual (05335-90021) details the instructions for installing the Option 010, the 10811 OCXO. Instruction "c" is below. You'd need to add the jumper back in. The factory jumper looks like a resistor. It may simply be cut with side cutters on your unit. You can use just a piece of wire, of course.
"c. Remove electrical lead (jumper), PIN 8159-0005, that connects A4U1B(6) and U2B(6)."
Bob
--------------------------------------------
On Tue, 5/17/16, Tom Holmes <tholmes at woh.rr.com> wrote:
Subject: [time-nuts] FS HP 5335A
To: "'Discussion of precise time and frequency measurement'" <time-nuts at febo.com>
Date: Tuesday, May 17, 2016, 4:38 PM
For some reason it did not have an
internal timebase when I got it, and
throws an error, UNLESS you have an external 10 MHz
connected before you
turn it on. Then it works fine.
Please contact off list for details,
AND if you happen to be in Dayton, OH, this weekend for a
little ham radio
swap fest with a mere 25,000 people attending, no shipping
required.
AND there will be at least a few known time-nuts in town if
anyone wants to
meet up. Make yourself known to John at the TAPR booth.
Tom Holmes, N8ZM
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list