[time-nuts] Capturing a 1PPS signal with a Keysight 53230A
Magnus Danielson
magnus at rubidium.dyndns.org
Mon May 23 00:38:50 UTC 2016
Hi,
On 05/02/2016 08:12 PM, Tom Van Baak wrote:
>> * DC
>> * 50Ohm
>> * Bandwidth filter enabled
>
> DC and 50R is ok. I would not use the filter; you want the fastest edge possible.
>
> You forgot to mention the most important setting of all - the trigger voltage. Check the signal at your inputs with a 'scope. I typically use 1.0 VDC, unless the 'scope suggests otherwise.
Oh, and turn of "auto" from trigger voltage, many counters tries to fix
it way quicker than the PPS occurs. The 53131/132 has this issue with PPS.
Cheers,
Magnus
More information about the Time-nuts_lists.febo.com
mailing list