[time-nuts] Looking for a Trimble Lassen SK-8 or SK II 5V GPS receiver

[Luc Gaudin]

Dear Bob,

In case you are looking for replacement, there is clone available for most of the old Trimble modules (Lassen, IQ, LP) :
	http://www.naelcom.com/ds/gps/ds_lassen_clone_series.pdf
Regards,

Luc 

-----Message d'origine-----
De : time-nuts [mailto:time-nuts-bounces at febo.com] De la part de Bob L.
Envoyé : lundi 30 mai 2016 03:55
À : time-nuts at febo.com
Objet : Re: [time-nuts] Looking for a Trimble Lassen SK-8 or SK II 5V GPS receiver

Hi folks,

I went with plan “B” and am no longer looking for relatively recent Lassen receivers.

The clock using the older Lassen receiver speaks NMEA as well as Trimble protocols. I’m building a simple ExpressPCB board in the Trimble Lassen form factor to interface with a variety of more modern receivers. A few gates and a jumper enabled logic inversion now enable the clock to use most any 5V integrated antenna/receiver speaking NMEA or Trimble protocols at RS-232 or CMOS levels. 

Also found a pair of Garmin GPS18x LVC 5m on ebay which will be arriving next week about the time the bare boards get here.

Problem solved, correct date restored!

Many thanks!
Bob L.
bobhome at pacbell dot net

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.