[time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd
Cube Central
cubecentral at gmail.com
Wed Nov 9 05:59:07 UTC 2016
I've used that sparkfun part to great success... Works like a charm. Highly recommended!
-Randal R.
(at CubeCentral)
-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Hal Murray
Sent: Tuesday, 08 November, 2016 22:13
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Cc: hmurray at megapathdsl.net
Subject: Re: [time-nuts] How to get PPS from ublox mini-PCI GPS to APU2 SoC serial port for ntpd
strykar at hotmail.com said:
> Would this do the trick? -
> http://www.banggood.com/8-Channel-Logic-Level-Tran
> slator-Converter-Bi-Directional-Module-p-1023173.html
Not likely.
The normal RS-232 level shifter chip includes an inverter. (No good reason, just historical, but with a long history.)
I can't understand the schematic on the part Gary suggested. I'd use something like this:
https://www.sparkfun.com/products/11189
--
These are my opinions. I hate spam.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list