[time-nuts] precision timing pulse
Bob Stewart
bob at evoria.net
Wed Nov 16 20:32:31 UTC 2016
Just a short comment on getting a PIC up and running. Microchip have come out with a number of tools, especially their "Configurator" software that will get you started pretty quickly. And there is a long list of example programs on microchip's website for simple programs that do things like read the ADC, write to a UART, etc.
Bob -----------------------------------------------------------------
AE6RV.com
GFS GPSDO list:
groups.yahoo.com/neo/groups/GFS-GPSDOs/info
From: Hal Murray <hmurray at megapathdsl.net>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Cc: hmurray at megapathdsl.net
Sent: Wednesday, November 16, 2016 1:14 PM
Subject: Re: [time-nuts] precision timing pulse
albertson.chris at gmail.com said:
> I'm wondering why everyone seems to be assuming a PIC is the right processor
If you want cycle-accurate timing, one approach is to count cycles. If you
have an assembly level background, the PIC is as good as any small chip.
Yes, it's a pain to get started if you don't have a working setup or a friend
with one you can copy.
--
These are my opinions. I hate spam.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list