[time-nuts] Temp/Humidity control systems?
Mark Spencer
mark at alignedsolutions.com
Wed Oct 26 18:27:50 UTC 2016
Hi John. You might want to look at "precision air conditioning" systems (to use the vendors phraseology) designed for small computer rooms for some ideas ?
I suspect getting close to your temperature spec may be easier than your humidity spec ? There may also be issues getting commercial units permitted / installed / inspected in a residential setting ?
As a side note I was impressed with the split unit my residential HVAC contractor installed during a recent Reno in my TV room. The newer units seem to have finer temperature units than the older ones. I don't believe my unit features any humidity control.
Hope this is of some interest.
Mark Spencer
> On Oct 26, 2016, at 10:58 AM, John Ackermann N8UR <jra at febo.com> wrote:
>
>> On 10/26/2016 1:00 PM, Richard (Rick) Karlquist wrote:
>>> On 10/26/2016 8:59 AM, John Ackermann N8UR wrote:
>>> I may have the opportunity to build a small "clock room" and am
>>> considering whether I could make it an environmentally controlled space.
>>> I'd like to learn about the options for doing this.
>>>
>>> The space would probably be 6x8 feet or so, in a basement with one
>>> outside wall.
>>
>> I'm lost with the basic concept here. Help me understand this.
>
> This room would be a large closet in my basement where two racks of various OCXO, Rb, Cs live. There wouldn't be a lot of in-and-out traffic. I'm not looking for 0.01 degree regulation -- <1 degree C and a few percent humidity throughout the year seems a reasonable goal.
>
> What I envisioned was a very small heat pump or other heating/air-con unit coupled with some sort of proportional control. I just don't know where to start looking for that, or what other issues to be thinking about.
>
> (I know the way time-nuts think, and I recall the great ideas posted here in the past about using an old refrigerator, or burying standards in a deep hole -- but this would be wrapped into a bigger construction project that I'm going to be managing from a distance, so I need to keep it fairly straight-forward.)
>
> Thanks, all!
>
> John
> ----
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the Time-nuts_lists.febo.com
mailing list