[time-nuts] What's the best Windows 10 ntp client?

Tim Shoppa tshoppa at gmail.com
Fri Sep 2 09:46:11 EDT 2016

For a Windows machine that is always on, I would strongly recommend
Meinberg NTPD as "easy to install and the real deal". And free. It works
just fine under Windows 10.

Dimension 4, I am not impressed by, but if the only thing it has to do is
set the clock at boot time, then it might be OK. But I think Windows 10
time service is good enough to do that out-of-the box from Microsoft.

Tim N3QE

On Fri, Sep 2, 2016 at 2:29 AM, Dr. David Kirkby <drkirkby at gmail.com> wrote:

> At my amateur radio club we have Internet access via a WiFi dongle with a
> Pay As You Go card. A Windows 10 PC is only powered up while we are there,
> so on around 2-4 hours per week.
> Does anyone have any thoughts on what might be the most suitable software
> to run on our Windows 10 PC to set the time correct?
> Someone installed "Dimension 4"
> http://www.thinkman.com/dimension4/
> As far as I can see, this takes the time from one single NTP server, which
> I believe is not a good idea.  However,  given we only run the PC on 2-4
> hours per week,  maybe no ntp client will work well,  but I would have
> thought using multiple servers being better than one.
> I am wondering if anyone has any better suggestions for software. .
> Dave.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list