[time-nuts] Trimble receiver 37426-61

[Tom Holmes]

HI Glenn...

I think I have something for you, but I am traveling and it isn't on my laptop. I will look for it next week when I get home. It was the installation manual and has the pinout you need.

Tom Holmes, N8ZM


-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Glenn Little WB4UIV
Sent: Monday, September 12, 2016 5:34 PM
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Subject: [time-nuts] Trimble receiver 37426-61

I have a Trimble receiver 37426-61 that I would like to see if it works.
Does anyone have the pinout information for the Trimble 7 pin interface?
The date code is 9905.
This receiver is no longer in Trimble's database.
Sure glad my doctor does not dump my records when I get that old.
I would suspect that due to lack of foresite that this receiver will 
have a Y2K problem as it was build just before the turn of the century.
I would also suspect that it will have a week 1024 rollover problem.

Any help appreciated.
73
Glenn
WB4UIV


-- 
-----------------------------------------------------------------------
Glenn Little                ARRL Technical Specialist   QCWA  LM 28417
Amateur Callsign:  WB4UIV            wb4uiv at arrl.net    AMSAT LM 2178
QTH:  Goose Creek, SC USA (EM92xx)  USSVI LM   NRA LM   SBE ARRL TAPR
"It is not the class of license that the Amateur holds but the class
of the Amateur that holds the license"
---------------------------------------------------------------------------