[time-nuts] Lucent RFTFm-II-XO

[Bob Camp]

Hi

I have had no problem using the PPS out of any of the Lucent boxes. They trigger counters
fine and a one shot stretches them to any length you might need.

Bob

> On Sep 22, 2016, at 8:31 AM, Bill Riches <bill.riches at verizon.net> wrote:
> 
> Be careful of the pps output from the dual lucent boxes.  Tried to use it to sync SL and found that it is a weird non-standard pulse and would not work even with a pulse stretcher as it looked too narrow.  I use the pps output from a Jackson unit and it syncs SL fine.
> 
> 73,
> 
> Bill, WA2DVU
> Cape May
> 
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Hal Murray
> Sent: Thursday, September 22, 2016 2:07 AM
> To: Discussion of precise time and frequency measurement
> Cc: hmurray at megapathdsl.net
> Subject: Re: [time-nuts] Lucent RFTFm-II-XO
> 
>> Is there a pinout posted somewhere  for the Lucent box RS422 D sub 9 connector?
> 
> It's in the mail archives.  Google for something like >time-nuts RS422 pinout<
> 
> If you are interested in timing, you want the PPS signal too.  (It won't be great over USB, but it might be fun to play with.  You can get your own hanging bridges.)
> 
> 
> 
> --
> These are my opinions.  I hate spam.
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.