[time-nuts] Frequency counter questions
Jerry Hancock
jerry at hanler.com
Wed Apr 26 13:06:27 UTC 2017
I don’t know what I was thinking when I asked this question as we don’t control the gate timing in a referenced counter.
> On Apr 26, 2017, at 3:59 AM, Bob kb8tq <kb8tq at n1k.org> wrote:
>
> Hi
>
>> On Apr 26, 2017, at 12:29 AM, Jerry Hancock <jerry at hanler.com> wrote:
>>
>> Do typical frequency counters start their gate in phase with the incoming signal? I guess the
>> answer would be, "It depends." I was just thinking about how I would program the STM32F7
>> counter I am designing.
>
> Since they don’t start (or stop) the gate in any specific relation to the input signal, the trick is to
> make sure you don’t get an extra count when the gate opens or closes. This is right back to the
> edge triggered vs level triggered issue. It also gets indirectly into the rechecking process in the
> MCU. Some of the “edge trigger” stuff is done in odd ways ….(= got two of the same after rechecking
> into a shift register …).
>
> Bob
>
>
>>
>> btw, Gilbert, a local time-nut, sold me a 5335 today so I will be able to buiild one great one
>> out of the two I will have.
>>
>> Jerry
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list