[time-nuts] Regarding the improved integrator A9 in the 5065A...
cdelect at juno.com
cdelect at juno.com
Thu Dec 28 17:44:24 UTC 2017
Ulf,
The new A9 was only installed in units that had the 10811 installed so HP
was not concerned with it working with the 105 oscillator.
In the 10811 interface the EFC from A9 goes thru a 316K resistor to a
147K (nominal) resistor to ground. This forms a voltage divider the feed
the 10811 EFC pin.
So the peak EFC the 10811 feels is much less than the A9 output!
Cheers,
Corby
More information about the Time-nuts_lists.febo.com
mailing list